On 22 May 1999 08:31AM, Ronny Haryanto wrote:
| di tempat saya:
| FontPath "unix/:7100"
OK... sudah saya coba selipkan di /etc/XF86Config
Langkah yang saya lakukan:
# xfstt &
$ startx
| X-nya nggak mau start kan pasti ada error messagenya, apa?
-- Start .X.err --
XFree86 Version 3.3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 4 1999
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF]
Configured drivers:
S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
s3_ViRGE
(using VT number 7)
XF86Config: /etc/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: samplerate: 60, buttons: 3
(**) Mouse: 3 button emulation (timeout: 200ms)
(**) S3V: Graphics device ID: "Primary-Card"
(**) S3V: Monitor ID: "Primary-Monitor"
(--) S3V: Mode "1600x1000" needs hsync freq of 27.40 kHz. Deleted.
(--) S3V: Mode "1280x960" needs vert refresh rate of 34.10 Hz. Deleted.
(--) S3V: Mode "1024x768" needs vert refresh rate of 44.89 Hz. Deleted.
(--) S3V: Mode "1600x1200" needs hsync freq of 27.40 kHz. Deleted.
(--) S3V: Mode "1280x1024" needs vert refresh rate of 31.96 Hz. Deleted.
(--) S3V: Mode "1152x864" needs vert refresh rate of 39.91 Hz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,unix/:7100,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi"
(--) S3V: PCI: ViRGE rev 6, Linear FB @ 0xf4000000
(--) S3V: chipset: ViRGE rev. 6
(**) S3V: chipset driver: s3_virge
(**) S3V: videoram: 2048k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 135 MHz (57 MHz for 32 bpp)
(--) S3V: Using Trio32/64 programmable clock (MCLK 75.170 MHz)
(--) S3V: Maximum allowed dot-clock: 57.000 MHz
(**) S3V: Mode "800x600": mode clock = 37.440
(**) S3V: Using packed 24 bpp. Color weight: 888
(**) S3V: Virtual resolution set to 800x600
(--) S3V: Local bus LAW is 0xF40xxxxx
(--) S3V: Using a banksize of 2048k, line width of 800
(**) Adding extended device "SWITCH" (type: Switch)
_FontTransSocketUNIXConnect: Can't connect: errno = 2
failed to set default font path
'/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,unix/:7100,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi'
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
-- End .X.err --
Sorry panjang...
RC5DES Cracking Participant [ID #188962]
Member of Indonesia Raya (aka GBT) - RC5-64 Cracking Team #6362
<http://rc5stats.distributed.net/rc5-64/tmsummary.php3?team=6362>
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
Hosted by http://www.Indoglobal.com
