Aloooo... saya pernah dapat advis dari milister di sini (kalo nggak
salah dari Avatar@.....) soal cara setting sound untuk jenis chip
onboard ... tapiiii.. saya udah coba macam macam kombinasi
(comment-uncomment pada baris-barisnya) but anyway, nggak bisa bisa juga
sound-nya bunyi.... berikut saya lampirkan pula jeroan pnpsound saya,
barangkali aja ada yang udah sukses untuk sound onboard
sejenis....Please and thanks... sorryyyy panjang amat yah..?! (malu ah
too much words..!)
# $Id: pnpdump.c,v 1.15a 1998/05/25 17:22:16 fox Exp $
# Trying port address 0203
# Board 1 has serial identifier 8d 01 00 01 00 01 00 a9 0d
# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)
# Card 1: (serial identifier 8d 01 00 01 00 01 00 a9 0d)
# Vendor Id CMI0001, Serial Number 16777472, checksum 0x8D.
# Version 1.0, Vendor version 0.0
ANSI string -->CMI8330/C3D Audio Adapter<--
#
# Logical device id @@@0001
#
(CONFIGURE CMI0001/16777472 (LD 0
# Multiple choice time, choose one only !
Start dependent functions: priority preferred
Logical device decodes 16 bit IO address lines
Minimum IO base address 0x0530
Maximum IO base address 0x0530
IO base alignment 1 bytes
Number of IO addresses required: 8
(IO 0 (BASE 0x0530))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 8
# (IO 1 (BASE 0x0388))
# IRQ 11.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 11 (MODE +E)))
# First DMA channel 0.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
(DMA 0 (CHANNEL 0))
(NAME "CMI0001/16777472[0]{CMI8330.Audio Adapter}")
# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0530
# Maximum IO base address 0x0530
# IO base alignment 1 bytes
Number of IO addresses required: 8
(IO 0 (BASE 0x0530))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 1 bytes
# Number of IO addresses required: 8
# (IO 1 (BASE 0x0388))
# IRQ 5, 7, 9, 10, 11 or 12.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
(DMA 0 (CHANNEL 0))
# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0530
# Maximum IO base address 0x0fe0
# IO base alignment 16 bytes
Number of IO addresses required: 8
(IO 0 (BASE 0x0530))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x03f8
# IO base alignment 16 bytes
# Number of IO addresses required: 8
# (IO 1 (BASE 0x0388))
# IRQ 5, 7, 9, 10, 11 or 12.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is not a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed in compatible mode
(DMA 0 (CHANNEL 0))
# End dependent functions
(ACT Y)
))
#
# Logical device id @H@0001
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration
required.
# Note that only the first value of any range is given, this may
be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CMI0001/16777472 (LD 1
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0330
# Maximum IO base address 0x0330
# IO base alignment 1 bytes
Number of IO addresses required: 2
(IO 0 (BASE 0x0330))
# IRQ 9.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 9 (MODE +E)))
# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0300
# Maximum IO base address 0x0330
# IO base alignment 16 bytes
# Number of IO addresses required: 2
# (IO 0 (BASE 0x0300))
# IRQ 5, 7, 9, 10, 11 or 12.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 5 (MODE +E)))
# End dependent functions
(NAME "CMI0001/16777472[1]{CMI8330. Audio Adapter}")
(ACT Y)
))
#
# Logical device id @P@0001
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration
required.
# Note that only the first value of any range is given, this may
be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CMI0001/16777472 (LD 2
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0200
# Maximum IO base address 0x0200
# IO base alignment 1 bytes
# Number of IO addresses required: 8
# (IO 0 (BASE 0x0200))
# Start dependent functions: priority acceptable
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0200
# Maximum IO base address 0x0fe0
# IO base alignment 16 bytes
# Number of IO addresses required: 8
# (IO 0 (BASE 0x0200))
# End dependent functions
# (ACT Y)
))
#
# Logical device id @X@0001
# Device supports vendor reserved register @ 0x3a
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration
required.
# Note that only the first value of any range is given, this may
be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CMI0001/16777472 (LD 3
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0220
# IO base alignment 1 bytes
# Number of IO addresses required: 16
# (IO 0 (BASE 0x0220))
#
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
Hosted by http://www.Indoglobal.com
