On Mon, 2 Aug 1999, Riston wrote:
> > Coba jalankan isapnp dulu, setelah itu
> > # insmod uart401
> > # insmod sb
> > # insmod opl3
> > # insmod awe_wave
>
> Caranya kok kayaknya susah sih?? ini karena pake SUSE atau memang sound card
> AWE64 Gold yang berbeda jauh dengan AWE 64 biasa??
> soalnya waktu saya setup AWE64 di Redhat6.0, cuma pake program sndconfig
> doang, dia langsung detect tuh, sound card-nya......
Saya juga ndak tau kenapa jalannya bisa rumit begitu :)
Cuma saya pernah simpan success story seseorg dgn card tsb
dan mungkin bisa dipakai utk yg alamin masalah yg mirip.
-- cut --
You need to add the appropriate sound modules, and in the right
order (this is important!). Select the 'sound cards' menu item and
you'll see a list of differend sound modules. The key ones for the AWE
64 are uart401, sb, opl3, and awe_wave. Whatever you do, do NOT load
awe_wave first! The soundcard won't work if you do (at least it didn't
for me).
Load the sb module first...it will tell you it needs uart401 and it will
load that as well. Then load the opl3 module, and finally the awe_wave
module. If all goes well you can do a 'cat /dev/sndstat' and see how
your soundcard was configured (remember, only do all this AFTER your ISA
PnP card has been configured).
-- cut --
Salam,
-- redoct
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
Hosted by http://www.Indoglobal.com
