Pengalaman saya, tembak aja pake NE2000 compatible. Jalan kok, yang penting
IO dan IRQ-nya benar.
Riev
----- Original Message -----
From: Hendro Wicaksono <[EMAIL PROTECTED]>
> Tolong dong (banget......)
> Networkcard saya Realtek 8019, sampai sekarang masih belum dikenali sama
> Redhat 6.0 dengan kernel 2.2.5. Di
> http://metalab.unc.edu/pub/Linux/docs/HOWTO/Ethernet-HOWTO disebutkan
> seperti dibawah:
>
> 5.31.3. RealTek 8019
> Status: Supported, Driver Name: ne (+8390)
> This is a Plug and Pray version of the above. Use the DOS software to
> disable PnP and enable jumperless configuration; set the card to a
> sensible I/O address and IRQ and you should be ready to go. (If using
> the driver as a module, don't forget to add an io=0xNNN option to
> /etc/conf.modules). The rset8019.exe program can be obtained from
> RealTek's WWW site at http://www.realtek.com.tw - or via ftp from the
> same site.
>
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
Hosted by http://www.Indoglobal.com
