Abdul Razak Munir wrote:
>
> Salam semua
> Saya punya dua harddisk, dipasang master (4,3 GB) dan slave (2,1 GB),
> bisa nggak pada master di pasangin RH 6.0 dan pada slave Windows 98 SE,
^^^^^^^^^^^^^^^^^^^
Untuk Windows 98 SE (ataupun Windows 9.x lainnya), hanya bisa di-install
pada harddisk primary master, TIDAK BISA di primary slave.
> tapi pada saat booting saya mau ada menu yang bisa milih mau linux atau
> win 98.
Bisa menggunakan boot manager, salah satunya (yang sudah saya coba,
meskipun baru mau install linux) System Commander. Ini ada tabel dari
System Commander, mengenai beberapa OS yang di-dukung olehnya, untuk
multi booting. Mungkin ada gunanya.
-----------------------------------------------------------------
Boot Logical minimum
OS Name Vendor Drives partition size notes
-----------------------------------------------------------------
AIX IBM 0 only no
BeOS Be 0 only no 250 MB
BSDI Unix Berkely Softw 0 only no
Btron 1B Btron 0 only no 40 MB
Coherent Unix Mark Williams any no 15 MB
CTOS Unisys 0 only no
DOS all 0 only no 1 MB
DOS/V IBM/Microsoft 0 only no 3 MB
FreeBSD all any no 80 MB
Interactive Unix SunSoft 0 only no 20 MB
JexeOS Toshiba 0 only no 100 MB
Linux all 0 or 1 yes 15 MB 8
Netware v2 Novell 0 only no 20 MB
NetWare v3 & v4 Novell 0 only no 55 MB 2
OpenStep Next 0 only no 120 MB
Open Server SCO 0 only no 100 MB 5
OS/2 v1.x IBM 0 only no 20 MB 1
OS/2 v2 to v4 IBM any yes 40 MB 1,4
Pick Pick Systems 0 only no 1
QNX QNX Software 0 only no
Solaris SunSoft any no 70 MB 7
Theos Theos Software 0 only no 10 MB
UnixWare SCO/Novell 0 only no 80 MB 5
Venix Venturcom 0 only no 100 MB
Windows 95 Microsoft 0 only no 40 MB 1,6,9
Windows 95J Microsoft 0 only no 80 MB 1,6,9
Windows 98 Microsoft 0 only no 250 MB 1,6,9
Windows 98J Microsoft 0 only no 250 MB 1,6,9
Windows NT v3.1 Microsoft 0 only no 90 MB 1,3
Windows NT v3.5 Microsoft 0 only no 100 MB 1,3
Windows NT v4.0 Microsoft 0 only no 120 MB 1,3
Windows NT v5.0 Microsoft 0 only no 250 MB 1,3,9
-----------------------------------------------------------------
notes:
1 - OS can be installed in the MultiFAT partition.
2 - This OS is launched after DOS is booted. Information
is stored in a separate non-bootable partition.
3 - A portion of the NT boot software is installed
in the MultiFAT partition. The remainder can be
installed in any FAT primary or logical partition on
any drive.
4 - If installed outside the MultiFAT partition, OS/2
requires IBM's boot manager to be installed in a
separate partition during installation. Boot
manager is not required once OS/2 is installed, when
using System Commander.
5 - The installation may move partitions around, causing
problems for other OSes. In addition, when partitions
are moved like this, System Commander may replace
your OS descriptions with generic names. Menu names
are associated with the physical partition number and
not the data in the partition. No data is lost, but
you may want to go through and update each OS
description under the Setup option, and verify Local
special options are set correctly for each OS choice.
6 - The boot portion is similar to a standard DOS, but
significant portions of the OS can be installed on
other drives.
7 - Solaris documentation indicates it only supports
booting from a diskette when installed on any drive
other than drive 0, but System Commander will
properly boot Solaris from any IDE drive, without a
Solaris boot diskette. Some SCSI controller/drive
combinations may not allow anything other than
booting Solaris from the first disk.
8 - Source code can be changed to support booting off of
other drives.
9 - Can be installed in and understands FAT-32 partitions.
(For Windows 95, only OSR2 supports FAT-32).
> Mohon pencerahan!
>
> thanx
> Razak
Budhi Soeprijanto
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
