Hello
1***********************
If your are not Indonesian, please skip this section 1.
Maaf buat rekan negeri, kalau ada yang bisa bantu pemecahannya
jawab dengan bahasa Indonesia tercinta aja yach. Punten, soalnya
saya cc ke bule.
2***********************
I have some Mars_nwe's problem here.
I use Red Hat 6.1, real Novell Netware 3.12 server,
and diskless workstation that connected to Netware
3***********************
This is my nw.routes log, and as you can see,
slist can detect 2 server and actually
I can mount the real Netware server
and /var/mars_nwe/ using ncpmount.
Mon Dec 27 11:09:13 1999
<--------- 1 Devices ---------------->
DevName Frame Ticks Network Status
eth0 802.2 1 39A01010 UP
<--------- 1 Routes ---------->
Network Hops Ticks RouterNet Router Node
49A01010 1 3 39A01010 00:40:05:27:44:6c
<--------- 2 Servers ---------->
Name Typ RouterNet Hops Server-Address
LINUX 4 59A01010 0 59:A0:10:10,00:00:00:00:00:01,04:51
NETWARE 4 39A01010 1 49:A0:10:10,00:00:00:00:00:01,04:51
4***********************
My /proc/net/ipx remote_address reported not_connected
when I'm not mount Netware and Mars_nwe.
But, if I mount them, remote_address reported 2 connection information.
5***********************
My /proc/net/ipx_interface contents (not mount Netware and Mars):
Network Node_Address Primary Device Frame_Type
59A01010 000000000001 Yes Internal None
39A01010 0040052B161E No eth0 802.2
6***********************
My /proc/net/ipx_route contents (not mount Netware and Mars):
Network Router_Net Router_Node
49A01010 39A01010 00400527446C
39A01010 Directly Connected
59A01010 Directly Connected
7***********************
This is my mars_nwe.log when I starting nwserv:
NWS 0 0:Starting Version: 0.99pl17
NWS 0 0:DEVICE=eth0, FRAME=802.2, NETWORK=0x39a01010
NWS 0 0:SERVER name='LINUX', INTERNAL NET=0x59a01010,
NODE=0x00:00:00:00:00:01
NWS 0 0:USE_PERMANENT_OUT_SOCKET enabled
NWS 0 0:IPX_MAX_DATA=1058, RW_BUFFERSIZE =1024
NWB 0 0:Starting Version: 0.99pl17
NWB 0 0:check_compress_bindery starts...
NWB 0 0:check_compress_bindery after qsort
NWB 0 0:check_compress_bindery after deleting props, propok=1
NWB 0 0:check_compress_bindery ends after 0 seconds.
NWB 0 0:Add/Change User='SUPERVISOR', UnixUser='supervisor'
NWB 0 0:Add/Change User='IVAN', UnixUser='ivan'
NWB 0 0:USE_PERMANENT_OUT_SOCKET enabled
NCP 0 0:Starting Version: 0.99pl17
NCP 0 0:USE_PERMANENT_OUT_SOCKET enabled
8***********************
I can login to Mars_nwe (2nd Netware server) from my diskless workstation
that use RPL booting information from Netware.
After login, then map drive and (magically) "f:/system" prompt displayed.
>From that prompt, I do "dir" and there is a message that no files found.
I checked the map drive and they were working.
BUT! when /var/mars_nwe/sys (not mounted) and its subdirs FILLED WITH
FILES,
these messages come out:
!! NWC 1 103:PANIC !!
NWC 1 103:!!! SIG_SEGV !!!:
at pid=826, ncp_sequence=103
NCP 0 0:Not ok:0x2222 conn=1 of 0 conns
And workstation said:
general failure reading device network
abort, retry, fail.
I decided to retry, and then:
extended error 5
Why?
Are there anything to do with ncpfs and mars_nwe that working together?
(as mentioned by Dave Burton ([EMAIL PROTECTED]) in his
Mars_nwe + Ncpfs Mini-Howto draft - I found it in www.deja.com
linux.networking forum archive)
How to solve it?
I will provide my mars_nwe.conf later. If you want it.
Thank's for the help.
[EMAIL PROTECTED]
http://www.eKilat.com
emailnya Indonesia!
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
