kenapa saya engga bisa buka Xwindows di SuSE 7.0 Profesional saya, padahal
SaX udah saya aktive kan tetapi setiap mengetikkan startx selalu ada
tampilam pesan ini:
There is no link /usr/X11R6/bin/X to /var/X11R6/bin/X! please link the files
as mentioned above or install the xserver again.
I`m aboting now
[ini yg kemaren saya tanyakan]
Setelah saya coba ternyata Card VGA Saya [S3 Trio 3D/2X] engga support pake
XFree86.
Ada petunjuk begini:
S3 Trio3D/2X (86C362, 86C368) doesn't work or is awfully slow
as a quick workaround for XFree86 3.3.3.1 to 3.3.5 you can specify
ChipID 0x8a10
VideoRam 4096
in the device section or compile your own server from XFree86 3.3.5 sources
using the following patch:
--- xc/programs/Xserver/hw/xfree86/vga256/drivers/s3v/regs3v.h~ Mon Sep 6
10:47:18 1999
+++ xc/programs/Xserver/hw/xfree86/vga256/drivers/s3v/regs3v.h Fri Sep 24
14:39:18 1999
@@ -421,7 +421,7 @@
/* Wait until Command FIFO is empty */
#define WaitCommandEmpty() do { int loop=0; mem_barrier();
\
- if (s3vPriv.chip == S3_ViRGE_GX2 || s3vPriv.chip == S3_ViRGE_MX ||
s3vPriv.chip == S3_ViRGE_MXP) \
+ if (S3_ViRGE_GX2_SERIES(s3vPriv.chip) ||
S3_ViRGE_MX_SERIES(s3vPriv.chip)) \
while
((!(((((mmtr)s3vMmioMem)->subsys_regs.regs.adv_func_cntl)) & 0x400)) &&
(loop++<MAXLOOP)); \
else if (S3_TRIO_3D_SERIES(s3vPriv.chip)) \
while (((IN_SUBSYS_STAT() & 0x5f00) != 0x5f00) &&
(loop++<MAXLOOP)); \
Gimana compile/edit Bugnya si XFree86Config nya ya
Mohon Masukan & bantuan dari rekan�
--------------------------------------------------------------------------
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Dapatkan FAQ milis dg mengirim email kosong ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
Pengelola dapat dihubungi lewat [EMAIL PROTECTED]
