Dear Temen-temen...
Saya koq ga bisa ya dial lewat modem dari Linux? Padahal udah pake wvdial,
di ifconfig yang keluar cuma eth0 ama lo, ppp0 nya ngga keluar.
Ini masalahnya apa ya?
Ini saya lampirkan dmesg ama wvdial.conf nya.
Terimakasih banyak.
Tommy
--------- dmesg ---------
Linux version 2.2.20-2tr ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Nov 25 19:32:51
JAVT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 0feec000 @ 00100000 (usable)
Detected 1343077 kHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2680.42 BogoMIPS
Memory: 257252k/262064k available (1320k kernel code, 412k reserved, 3012k
data, 68k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(TM) XP 1500+ stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf1180
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 262144 bhash 65536)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
Initializing RT netlink socket
Starting kswapd v 1.5
vesafb: framebuffer at 0xd8000000, mapped to 0x90009000, size 32768k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:0e1d
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 1024 Unix98 ptys configured
Real Time Clock Driver v1.09
Sound initialization started
Sound initialization complete
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide0: VIA Bus-Master (U)DMA Timing Config Success
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: ST310212A, ATA DISK drive
hdc: CD-540E, ATAPI CDROM drive
hdd: PLEXTOR CD-R PX-W2410A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST310212A, 9768MB w/512kB Cache, CHS=1245/255/63
hdc: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
PPP BSD Compression module registered
PPP Deflate Compression module registered
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Creative EMU10K1 PCI Audio Driver, version 0.7, 19:33:23 Nov 25 2002
emu10k1: EMU10K1 rev 5 model 0x20 found, IO at 0xa400-0xa41f, IRQ 5
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 56216k swap-space (priority -1)
rtl8139.c:v1.07 5/6/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth0: RealTek RTL8139 Fast Ethernet at 0x9800, IRQ 10, 00:50:fc:3f:20:f7.
--------- wvdial.conf ---------
[Dialer Defaults]
Username = telkomnet@instan
Password = telkom
Phone = 080989999
Modem = /dev/ttyS0
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 S11=55 +FCLASS=0
--
Utk berhenti langganan, kirim email ke [EMAIL PROTECTED]
Dapatkan FAQ milis dg mengirim email kosong ke [EMAIL PROTECTED]
Informasi arsip di http://www.linux.or.id/milis.php3
