ic IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
33, 34 not connected.
number of MP IRQ sources: 16.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 0FF 0F 1 1 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 0FF 0F 1 1 0 0 0 1 1 91
0a 0FF 0F 1 1 0 0 0 1 1 99
0b 0FF 0F 1 1 0 0 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 000 00 0 0 0 0 0 1 1 B9
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf100-0xf107, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 14X CDROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.52
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
IP-Config: No network devices available.
Partition check:
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ncr53c8xx: at PCI bus 1, device 9, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 1, device 9, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc5fddf00, io_port=0x2000, irq=9
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc5fdf000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc5fdde00, io_port=0x2400, irq=10
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc5fde000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - revision 3.1f
scsi1 : ncr53c8xx - revision 3.1f
scsi : 2 hosts.
ncr53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: HD0093172C Rev: 3207
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
ncr53c876-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: HD0093172C Rev: 3207
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
ncr53c876-0-<2,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: HD0093172C Rev: 3207
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0
ncr53c876-0-<3,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: HD0093172C Rev: 3207
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi0, channel 0, id 3, lun 0
ncr53c876-0-<0,0>: tagged command queue depth set to 4
ncr53c876-0-<1,0>: tagged command queue depth set to 4
ncr53c876-0-<2,0>: tagged command queue depth set to 4
ncr53c876-0-<3,0>: tagged command queue depth set to 4
Vendor: EXABYTE Model: EXB-8505 Rev: 0051
Type: Sequential-Access ANSI SCSI revision: 02
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB]
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB]
sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 >
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB]
sdc: sdc1 sdc2 < sdc5 sdc6 >
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 17773500 [8678 MB] [8.7 GB]
sdd: sdd1 sdd2 < sdd5 sdd6 >
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 48k freed
Adding Swap: 128484k swap-space (priority -1)
Adding Swap: 128484k swap-space (priority -2)
Adding Swap: 128484k swap-space (priority -3)
Adding Swap: 128484k swap-space (priority -4)
Adding Swap: 128484k swap-space (priority -5)
Adding Swap: 128484k swap-space (priority -6)
Adding Swap: 128484k swap-space (priority -7)
st: bufsize 32768, wrt 30720, max buffers 4, s/g segs 16.
Detected scsi tape st0 at scsi1, channel 0, id 5, lun 0
NET4: Linux IPX 0.38 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
NET4: AppleTalk 0.18 for Linux NET4.0
TLAN driver, v1.0, (C) 1997-8 Caldera, Inc.
TLAN: eth0 irq= 5 io=2800, Compaq Netelligent Integrated 10/100 TX UTP, Rev. 16
TLAN: eth0: Starting autonegotiation.
arpwatch uses obsolete (PF_INET,SOCK_PACKET)
device eth0 entered promiscuous mode
TLAN: eth0: Autonegotiation complete.
TLAN: eth0: Link active.
nfs warning: mount version older than kernel
NET4: Linux IPX 0.38 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
NET4: AppleTalk 0.18 for Linux NET4.0
