Hi,
I'm getting the following in dmesg when booting... Everything seems to
work ok except the driver module for the Packet Engines Gigabit ethernet
(hamachi) card won't load at startup, I have to do it by hand later.
thanks,
Dan
--
System Analyst
University Information Technology Services
Indiana University
[EMAIL PROTECTED]
-------------------------------------------------------------
Linux version 2.2.1 (root@ppc30) (gcc version 2.7.2.3) #2 SMP Sat Jan 30 15:17:25 EST
1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 398799793 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 398.13 BogoMIPS
Memory: 257932k/262144k available (924k kernel code, 420k reserved, 2804k data, 64k
init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
per-CPU timeslice cutoff: 100.19 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 398.8107 MHz.
..... system bus clock speed is 99.7025 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 398.13 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 01
Total of 2 processors activated (796.26 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 10, 11, 15, 24, 25, 26, 27, 32, 33, 34 not connected.
number of MP IRQ sources: 32.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 0FF 0F 1 1 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 1 0 0 0 0 0 0 00
10 0FF 0F 1 1 0 1 0 1 1 A1
11 0FF 0F 1 1 0 1 0 1 1 A9
12 0FF 0F 1 1 0 1 0 1 1 B1
13 0FF 0F 1 1 0 1 0 1 1 B9
14 0FF 0F 1 1 0 1 0 1 1 C1
15 0FF 0F 1 1 0 1 0 1 1 C9
16 0FF 0F 1 1 0 1 0 1 1 D1
17 0FF 0F 1 1 0 1 0 1 1 D9
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 0FF 0F 1 1 0 1 0 1 1 E1
1d 0FF 0F 1 1 0 1 0 1 1 E9
1e 0FF 0F 1 1 0 1 0 1 1 F1
1f 0FF 0F 1 1 0 1 0 1 1 F9
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I6,P0) -> 31
PCI->APIC IRQ transform: (B0,I6,P1) -> 30
PCI->APIC IRQ transform: (B0,I7,P0) -> 29
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0240-0x0247, BIOS settings: hda:pio, hdb:pio
hda: CD-224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.52
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
ncr53c8xx: at PCI bus 0, device 6, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 0, device 6, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc6ffbf00, io_port=0x2000, irq=31
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6fff000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6ffbe00, io_port=0x2400, irq=30
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6ffe000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - revision 3.1f
scsi1 : ncr53c8xx - revision 3.1f
scsi : 2 hosts.
ncr53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: ST34572WC Rev: 0892
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
ncr53c876-0-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16)
Vendor: COMPAQ Model: MAB3045SC Rev: 0814
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
ncr53c876-0-<0,0>: tagged command queue depth set to 4
ncr53c876-0-<1,0>: tagged command queue depth set to 4
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8386000 [4094 MB] [4.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8386000 [4094 MB] [4.1 GB]
TLAN 1.0: eth0 irq=29 io=3000, Compaq Netelligent Integrated 10/100 TX UTP, Rev. 16
Partition check:
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 130748k swap-space (priority -1)
Adding Swap: 130748k swap-space (priority -2)
Adding Swap: 130748k swap-space (priority -3)
Adding Swap: 130748k swap-space (priority -4)
TLAN: eth0: Starting autonegotiation.
TLAN: eth0: Autonegotiation complete.
TLAN: eth0: Link active.
Found Hamachi GNIC-II at PCI address 0xc6ffc004, IRQ 21.
hamachi.c:v0.07 8/17/98 Written by Donald Becker
http://www.tidalwave.net/~becker/hamachi.html
eth1: Hamachi GNIC-II type 10911 at 0xd0859000, 00:e0:b1:04:19:58, IRQ 21.
eth1: 32-bit 33 Mhz PCI bus (60), Virtual Jumpers 30, LPA 0000.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
