I just tried a couple of quick things and here is what I found out:
If you use XOSVIEW with options
xosview -cpu -int
It works! All the other options work but if you want show either cpu or
interrupt state it will not display.
Here is my proc information for cpu and interrupts (Nothing strange here
though!)
CPU info
=======================
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 3
cpu MHz : 199.419635
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 398.13
processor : 1
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 3
cpu MHz : 199.419635
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 398.13
Interrupt Info
=======================
CPU0 CPU1
0: 4834782 5064255 IO-APIC-edge timer
1: 4 20 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
5: 33033 32715 IO-APIC-level eth0
8: 0 1 IO-APIC-edge rtc
12: 113 86 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 134251 122158 IO-APIC-edge ide0
15: 73429 75704 IO-APIC-edge ide1
NMI: 0
ERR: 0
Later,
Earle
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: Patrick Hartmann <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, April 16, 1999 6:09 PM
Subject: Re: xosview / 2.2.5
> I just tried xosview and I have the same problem on my system as well.
> Partial strace:
> close(4) = 0
> write(3, "-\0\5\0\1\0\300\6\10\0\0\0007x13"..., 28) = 28
> read(3, 0xbffff610, 32) = -1 EAGAIN (Resource temporarily
> unavailable)
> select(4, [3], NULL, NULL, NULL) = 1 (in [3])
> read(3, "\1\0\v\0005\3\0\0\0\0\0\0\7\0\0\0"..., 32) = 32
> read(3, "\2\0\0\0\0\0*@\0\0\377\0\0\0\27\0"..., 28) = 28
> read(3, "\257\0\0\0\260\0\0\0\235\0\0\0\261"..., 184) = 184
> read(3, "\1\0\6\0\7\0\n\0\1\0\0\0\0\0\6\0"..., 3072) = 3072
> open("/proc/stat", O_RDONLY) = 4
> fstat(4, {st_mode=0, st_size=0, ...}) = 0
> mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) =
> 0x4000b000
> read(4, "cpu 206446 4391 135237 16425406"..., 1024) = 803
>
> So it is hanging while reading /proc/stat... I can cat this file without
> problems, so at least it doesn't appear to be major breakage. Perhaps
someone
> inadvertently changed the format a little? I cannot reboot my system to
an
> older kernel right now unfortunately, but I do have output for 2.0.34 and
> 2.2.5:
>
>
> 2.0.34 (SMP dual proc 450GX):
> cpu 1584759 2464060 1946869 192121643
> disk 687965 160392 0 0
> disk_rio 350256 45014 0 0
> disk_wio 337709 115378 0 0
> disk_rblk 895440 90028 0 0
> disk_wblk 699136 230756 0 0
> page 966642 1139412
> swap 32495 6793
> intr 404308513 198116010 1124 0 0 0 0 0 0 1 30 35485605 166470817 0
3386488 0
> 848438
> ctxt 307311044
> btime 922297245
> processes 17232
>
> 2.2.5 (SMP dual proc 450GX [different machine]):
> cpu 214701 4391 135528 16432954
> cpu0 107559 2281 68280 8215667
> cpu1 107142 2110 67248 8217287
> disk 55661 47416 44480 0
> disk_rio 20020 34874 22190 0
> disk_wio 35641 12542 22290 0
> disk_rblk 40232 69754 44380 0
> disk_wblk 71420 25084 44580 0
> page 540858 237658
> swap 158 313
> intr 10032332 8393787 53955 0 0 0 0 0 252068 1 199587 0 30 1132903 1 0 0 0
0 0
> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0
> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0
> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0
> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0
> 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0
> 0 0 0 0 0 0 0 0 0 0
> ctxt 8139856
> btime 924194772
> processes 7641
> --
> ________________________________________________________
> Daniel Thom File Systems Technician
> Work: [EMAIL PROTECTED] (503) 578-5764
> Home: [EMAIL PROTECTED]
> http://www.teleport.com/~dath/ >>>UNDER CONSTRUCTION<<<
> --------------------------------------------------------
>
>
> -
> Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
> To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
>
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
