We're using Compaq Proliant 7000
Thanks in advance.
See below;
-------------------------------------------------------------------------------
) stepping 03
Booting processor 1 eip 2000
Calibrating delay loop... 399.77 BogoMIPS
OK.
CPU1: Intel Pentium II (Deschutes) stepping 03
Booting processor 2 eip 2000
Calibrating delay loop... 399.77 BogoMIPS
OK.
CPU2: Intel Pentium II (Deschutes) stepping 03
Total of 4 processors activated (1598.26 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 2, 3, 4, 5, 6, 7, 16, 20, 21, 22, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46 not connected.
number of MP IRQ sources: 15.
number of IO-APIC registers: 47.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 002E0011
....... : max redirection entries: 002E
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 0 0 0 0 0 1 1 59
01 0FF 0F 1 1 0 0 0 1 1 61
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 0 0 0 0 0 1 1 69
09 000 00 0 0 0 0 0 1 1 71
0a 0FF 0F 1 1 0 0 0 1 1 79
0b 000 00 0 0 0 1 0 1 1 81
0c 000 00 0 0 0 0 0 1 1 89
0d 000 00 0 0 0 0 0 1 1 91
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 0FF 0F 0 0 0 0 0 1 1 51
13 0FF 0F 1 1 0 0 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 0FF 0F 1 1 0 0 0 1 1 B1
18 0FF 0F 1 1 0 0 0 1 1 B9
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
23 000 00 1 0 0 0 0 0 0 00
24 000 00 1 0 0 0 0 0 0 00
25 000 00 1 0 0 0 0 0 0 00
26 000 00 1 0 0 0 0 0 0 00
27 000 00 1 0 0 0 0 0 0 00
28 000 00 1 0 0 0 0 0 0 00
29 000 00 1 0 0 0 0 0 0 00
2a 000 00 1 0 0 0 0 0 0 00
2b 000 00 1 0 0 0 0 0 0 00
2c 000 00 1 0 0 0 0 0 0 00
2d 000 00 1 0 0 0 0 0 0 00
2e 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 18
IRQ1 -> 15
IRQ3 -> 0
IRQ4 -> 9
IRQ5 -> 1
IRQ6 -> 12
IRQ7 -> 14
IRQ8 -> 11
IRQ9 -> 19
IRQ10 -> 10
IRQ11 -> 23
IRQ12 -> 13
IRQ13 -> 17
IRQ14 -> 8
IRQ15 -> 24
.................................... done.
PCI: PCI BIOS revision 2.10 entry at 0xf0070
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:80 [8086/84ca]: Scanning peer host bridges
PCI: Device 00:78 not found by BIOS
PCI: Device 00:80 not found by BIOS
PCI: Device 00:90 not found by BIOS
PCI: Device 00:98 not found by BIOS
PCI: Device 00:a0 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 2048 Unix98 ptys configured
Real Time Clock Driver v1.09
Non-volatile memory driver v1.0
PIIX4: IDE controller on PCI bus 00 dev 79
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU611-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 10X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
sym53c8xx: at PCI bus 0, device 13, function 0
sym53c8xx: 53c875 detected
sym53c8xx: at PCI bus 4, device 9, function 0
sym53c8xx: 53c876 detected
sym53c8xx: at PCI bus 4, device 9, function 1
sym53c8xx: 53c876 detected
sym53c875-0: rev=0x04, base=0xb1fc0000, io_port=0x2800, irq=11
sym53c875-0: NCR clock is 40218KHz, 40037KHz
sym53c875-0: ID 7, Fast-20, Parity Checking
sym53c875-0: on-chip RAM at 0xb1fb0000
sym53c875-0: restart (scsi reset).
sym53c875-0: Downloading SCSI SCRIPTS.
sym53c876-1: rev=0x14, base=0xb7df0000, io_port=0x5000, irq=11
sym53c876-1: ID 7, Fast-20, Parity Checking
sym53c876-1: on-chip RAM at 0xb7de0000
sym53c876-1: restart (scsi reset).
sym53c876-1: Downloading SCSI SCRIPTS.
sym53c876-2: rev=0x14, base=0xb7dd0000, io_port=0x5400, irq=11
sym53c876-2: NCR clock is 40218KHz, 40218KHz
sym53c876-2: ID 7, Fast-20, Parity Checking
sym53c876-2: on-chip RAM at 0xb7dc0000
sym53c876-2: restart (scsi reset).
sym53c876-2: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx - version 1.3e
scsi1 : sym53c8xx - version 1.3e
scsi2 : sym53c8xx - version 1.3e
scsi : 3 hosts.
sym53c876-1-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: HD00431731 Rev: 3208
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0
sym53c876-1-<1,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
Vendor: COMPAQ Model: HD00431731 Rev: 3208
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0
Vendor: HP Model: C1537A Rev: L708
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi1, channel 0, id 6, lun 0
sym53c876-1-<0,0>: tagged command queue depth set to 8
sym53c876-1-<1,0>: tagged command queue depth set to 8
scsi : detected 1 SCSI tape 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8386000 [4094 MB] [4.1 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8386000 [4094 MB] [4.1 GB]
Compaq SMART2 Driver (v 1.0)
Found 1 controller(s)
Finding drives on ida0 (SMART-2/P)
ida/c0d0: blksz=512 nr_blks=106626720
TLAN 1.0: eth0 irq= 5 io=7000, Compaq Netelligent Dual 10/100 TX PCI UTP, Rev. 16
TLAN 1.0: eth1 irq= 5 io=7010, Compaq Netelligent Dual 10/100 TX PCI UTP, Rev. 16
Partition check:
ida/c0d0: p1
sda: sda1 sda2 sda3
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed
Adding Swap: 128516k swap-space (priority -1)
Adding Swap: 127808k swap-space (priority -2)
Adding Swap: 127808k swap-space (priority -3)
Adding Swap: 127776k swap-space (priority -4)
Adding Swap: 127776k swap-space (priority -5)
Adding Swap: 127776k swap-space (priority -6)
TLAN: eth0: Starting autonegotiation.
TLAN: eth0: Autonegotiation complete.
TLAN: eth0: Link active.
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
