Three questions -
Q1: PID 1010 & 954 never exceed 50% of the CPU. Is there a reason for this?
10:18am up 1 day, 32 min, 3 users, load average: 2.00, 2.00, 1.91
24 processes: 20 sleeping, 4 running, 0 zombie, 0 stopped
CPU states: 2.3% user, 0.0% system, 5.1% nice, 19.5% idle
Mem: 971564K av, 458224K used, 513340K free, 10996K shrd, 2320K buff
Swap: 137080K av, 0K used, 137080K free 28348K cached
PID USER PRI NI SIZE RSS SHARE STAT LIB %CPU %MEM TIME COMMAND
1010 ebn 6 4 400M 400M 304 R N 0 50.0 42.2 37:04 run.5v2l7c4n0
954 sandvik 20 19 9636 9636 440 R N 0 48.1 0.9 39:02 cccc16.out
Linux version 2.2.8 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #1 SMP Sat May 15 18:36:28 MDT 1999
Warning only 960MB will be used.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 451030220 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 448.92 BogoMIPS
Memory: 971512k/983040k available (1116k kernel code, 420k reserved, 9940k data, 52k
init)
Pentium-III serial number disabled.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.34 (19990310) Richard Gooch ([EMAIL PROTECTED])
Pentium-III serial number disabled.
per-CPU timeslice cutoff: 100.00 usecs.
CPU1: Intel 00/07 stepping 02
calibrating APIC timer ...
..... CPU clock speed is 451.0424 MHz.
..... system bus clock speed is 100.2313 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 450.56 BogoMIPS
Pentium-III serial number disabled.
OK.
CPU0: Intel 00/07 stepping 02
Total of 2 processors activated (899.48 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
Q2: With a dual processor system & 1GB of memory, will there be any problems in
modifying
/usr/src/linux/include/asm-i386/pages.h and
/usr/src/linux/arch/i386/vmlinux.lds
to obtain more memory?
Q3: Does the following console crash message mean there was a problem
with user's code variable tss.cr3 or is this a kernel variable?
Uhhuh. NMI received. Dazed and confused, but trying to continue
You probably have a hardware problem with a RAM chip.
Unable to handle kernel NULL pointer deference at virtual address 00000000
current->tss.cr3=00100000,
%cr3=00101000
*pde = 00000000
oops:0000
CPU: 1
--
++++++++++++++++++++++++++++++++++++++++++++++
Dave Neal Email Address - ??????
Phone w/ Voice Mail (505) 665-6471
Digital Pager - (505) 6659800 Pager ID 1048666
++++++++++++++++++++++++++++++++++++++++++++++
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
