Hi!
I'm having quite a bad time with my Gigabyte Mainboard 586DX, equipped
with 2xP166MMX. I'm not able to get it working correctly with the newer
kernels, the last one that worked flawlessly was 2.2.1 (but only with
the "noapic" setting for the kernel).
All other kernels up to 2.2.7 (last try) seemed to ignore the noapic
keyword and tried to activate IOAPIC - but then the SCSI-Controler
(AHA2940) did not initialize correctly and went into an endless
reset-loop.
Now I gave 2.2.10 a try - and it workes. Well, sort of. I still use
the noapic setting (wich is acepted now), but as soon as I load one of
my two ISA-Card drivers (Soundblaster 64AWE and a simple SCSI-card using
the g_NCR5380 driver) and try to access the device, the kernel freezes
immideately - no messages at all (logging to console 10).
In case of the SB-driver (I'm using alsa 0.3.2) I am able to load the
driver (modprobe snd-sb16 or snd-sbawe). Only when I try to actually
play some sound, it crashes.
System is SuSE 6.1
Any ideas what I could try (except from not using sound and my scanner
which is connected to the SCSI-card)?
Attached is some info on my system (bootmessage, entries in /proc):
(Sorry, a bit long, but I don't know what really is important)
Peter
<4>Linux version 2.2.10 (root@maus) (gcc version 2.7.2.3) #6 SMP Sun Jun 27 13:15:15
CEST 1999
<4>Intel MultiProcessor Specification v1.1
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 Pentium(tm) APIC version 17
<4>Processor #1 Pentium(tm) APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Detected 167047519 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 333.41 BogoMIPS
<4>Memory: 128188k/131072k available (876k kernel code, 420k reserved, 1552k data, 36k
init)
<6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction... OK.
<6>Intel Pentium with F0 0F bug - workaround enabled.
<4>POSIX conformance testing by UNIFIX
<4>per-CPU timeslice cutoff: 1.56 usecs.
<4>CPU0: Intel Pentium MMX stepping 03
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 167.0431 MHz.
<4>..... system bus clock speed is 66.8169 MHz.
<4>Booting processor 1 eip 2000
<4>Calibrating delay loop... 333.41 BogoMIPS
<4>OK.
<4>CPU1: Intel Pentium MMX stepping 03
<6>Total of 2 processors activated (666.83 BogoMIPS).
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb4d0
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>Starting kswapd v 1.5
<6>Serial driver version 4.27 with no serial options enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>pty: 256 Unix98 ptys configured
<6>Real Time Clock Driver v1.09
<6>(scsi0) <Adaptec AIC-7880 Ultra SCSI host adapter> found at PCI 12/0
<6>(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
<6>(scsi0) Downloading sequencer code... 413 instructions downloaded
<4>scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4
<4> <Adaptec AIC-7880 Ultra SCSI host adapter>
<4>scsi : 1 host.
<6>(scsi0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8.
<4> Vendor: IBM Model: DCAS-34330W Rev: S65A
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
<6>(scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 8.
<4> Vendor: HP Model: C1533A Rev: 9608
<4> Type: Sequential-Access ANSI SCSI revision: 02
<4> Vendor: NEC Model: CD-ROM DRIVE:502 Rev: 2.2e
<4> Type: CD-ROM ANSI SCSI revision: 02
<6>(scsi0:0:4:0) Using asynchronous transfers.
<4> Vendor: YAMAHA Model: CRW4260 Rev: 1.0h
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>scsi : detected 1 SCSI disk total.
<4>SCSI device sda: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1 GB]
<6>tulip.c:v0.89H 5/23/98 [EMAIL PROTECTED]
<6>eth0: Digital DC21041 Tulip at 0x6400, 21041 mode, 00 80 c8 6e f2 3a, IRQ 10.
<6>eth0:21041 Media information at 30, default media 0800 (Autosense).
<6>eth0: 21041 media #0, 10baseT.
<6>eth0: 21041 media #0, 10baseT.
<6>eth0: 21041 media #0, 10baseT.
<4>Partition check:
<4> sda: sda1 sda2 sda3 sda4
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>Freeing unused kernel memory: 36k freed
<6>Adding Swap: 130748k swap-space (priority -1)
interrupts:
CPU0 CPU1
0: 68376 0 XT-PIC timer
1: 2263 0 XT-PIC keyboard
2: 0 0 XT-PIC cascade
5: 0 0 XT-PIC Sound Blaster 16
8: 2 0 XT-PIC rtc
10: 6 0 XT-PIC eth0
12: 6019 0 XT-PIC aic7xxx
13: 1 0 XT-PIC fpu
NMI: 0
ERR: 0
ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0213-0213 : isapnp read
0220-022f : Sound Blaster 16
02f8-02ff : serial(auto)
0330-0331 : Sound Blaster 16 - MPU-401
0388-038b : Sound Blaster 16 - FM
03c0-03df : vga+
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
6000-60be : aic7xxx
6400-647f : eth0
isapnp:
Device 1 'CTL00e4:Creative SB AWE64 PnP' PnP version 1.0 Product version 1.0
Logical device 0 'CTL0045:Audio'
Device is active
Active port 0x220,0x330,0x388
Active IRQ 5 [0x2]
Active DMA 1,5
Resources 0
Priority preferred
Port 0x220-0x220, align 0x0, size 0x10, 16-bit address decoding
Port 0x330-0x330, align 0x0, size 0x2, 16-bit address decoding
Port 0x388-0x388, align 0x0, size 0x4, 16-bit address decoding
IRQ 5 High-Edge
DMA 1 8-bit byte-count compatible
DMA 5 16-bit word-count compatible
Alternate resources 0:1
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
Port 0x388-0x388, align 0x0, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:2
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:3
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Alternate resources 0:4
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
Port 0x388-0x388, align 0x0, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:5
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0x2f, size 0x2, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:6
Priority acceptable
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
Alternate resources 0:7
Priority functional
Port 0x220-0x280, align 0x1f, size 0x10, 16-bit address decoding
Port 0x300-0x330, align 0xf, size 0x2, 16-bit address decoding
Port 0x388-0x394, align 0x3, size 0x4, 16-bit address decoding
IRQ 5,7,2/9,10 High-Edge
DMA 0,1,3 8-bit byte-count compatible
DMA 5,6,7 16-bit word-count compatible
Logical device 1 'CTL7002:Game'
Compatible device PNPb02f
Device is active
Active port 0x200
Resources 0
Priority preferred
Port 0x200-0x200, align 0x0, size 0x8, 16-bit address decoding
Alternate resources 0:1
Priority acceptable
Port 0x200-0x208, align 0x7, size 0x8, 16-bit address decoding
Logical device 2 'CTL0022:WaveTable'
Device is active
Active port 0x620
Resources 0
Priority preferred
Port 0x620-0x620, align 0x0, size 0x4, 16-bit address decoding
Alternate resources 0:1
Priority acceptable
Port 0x620-0x680, align 0x1f, size 0x4, 16-bit address decoding
pci:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel 82439HX Triton II (rev 3).
Medium devsel. Master Capable. Latency=32.
Bus 0, device 7, function 0:
ISA bridge: Intel 82371SB PIIX3 ISA (rev 1).
Medium devsel. Fast back-to-back capable. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: Intel 82371SB PIIX3 IDE (rev 0).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=32.
I/O at 0xf000 [0xf001].
Bus 0, device 8, function 0:
VGA compatible controller: Matrox Millennium II (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 15. Master Capable.
Latency=32.
Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
Non-prefetchable 32 bit memory at 0xe2800000 [0xe2800000].
Non-prefetchable 32 bit memory at 0xe2000000 [0xe2000000].
Bus 0, device 9, function 0:
Multimedia video controller: Brooktree Bt848 (rev 18).
Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable.
Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xe2805000 [0xe2805008].
Bus 0, device 10, function 0:
Ethernet controller: DEC DC21041 (rev 33).
Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable.
Latency=32.
I/O at 0x6400 [0x6401].
Non-prefetchable 32 bit memory at 0xe2804000 [0xe2804000].
Bus 0, device 11, function 0:
Multimedia video controller: 3Dfx Voodoo (rev 2).
Fast devsel. Fast back-to-back capable.
Prefetchable 32 bit memory at 0xe1000000 [0xe1000008].
Bus 0, device 12, function 0:
SCSI storage controller: Adaptec AIC-7880U (rev 0).
Medium devsel. Fast back-to-back capable. IRQ 12. Master Capable.
Latency=32. Min Gnt=8.Max Lat=8.
I/O at 0x6000 [0x6001].
Non-prefetchable 32 bit memory at 0xe2806000 [0xe2806000].
devices:
Character devices:
1 mem
2 pty
3 ttyp
4 ttyS
5 cua
7 vcs
10 misc
14 sound
116 alsa
128 ptm
136 pts
Block devices:
8 sd
dma:
1: Sound Blaster 16
4: cascade
5: Sound Blaster 16
asound/devices:
0: [0] : control
2: [0] : hardware dependent
4: [0- 0]: mixer
8: [0- 0]: raw midi
16: [0- 0]: digital audio
33: : timer
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dr. Peter "Pit" Suetterlin http://www.astro.uu.nl/~suetter
Sterrenkundig Instituut Utrecht
Tel.: +31 (0)30 253 5225 [EMAIL PROTECTED]
__________________________________________________________________________
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
