This is a boot.log from a Compaq PRO LIANT 3000
The kernel is linux 2.2.10 with Compaq Disk Array 3200 patches included.
Peter
Peter Komanns
E-Mail: [EMAIL PROTECTED]
Inspecting /boot/System.map
Loaded 7102 symbols from /boot/System.map.
Symbols match kernel version 2.2.10.
No module symbols loaded.
klogd 1.3-3, log source = /proc/kmsg
started.
<4>Linux version 2.2.10 (root@t3lx)
(gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #7 SMP mar lug
27 20:11:00 CEST 1999
<4>Intel MultiProcessor Specification
v1.4
<4> Virtual Wire
compatibility mode.
<4>OEM ID: COMPAQ Product
ID: PROLIANT APIC at: 0xFEE00000
<4>Processor #1 Pentium(tm) Pro
APIC version 16
<4>Processor #0 Pentium(tm) Pro
APIC version 16
<4>I/O APIC #8 Version 17 at 0xFEC00000.
<4>Processors: 2
<4>mapped APIC to ffffe000 (fee00000)
<4>mapped IOAPIC to ffffd000 (fec00000)
<4>Detected 498866396 Hz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 498.07
BogoMIPS
<4>Memory: 257748k/262144k available
(1048k kernel code, 420k reserved, 2860k data, 68k init)
<6>Checking 386/387 coupling...
OK, FPU using exception 16 error reporting.
<6>Checking 'hlt' instruction...
OK.
<4>POSIX conformance testing by
UNIFIX
<4>per-CPU timeslice cutoff: 100.17
usecs.
<4>CPU1: Intel 00/07 stepping 02
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 498.8597
MHz.
<4>..... system bus clock speed
is 99.7716 MHz.
<4>Booting processor 0 eip 2000
<4>Calibrating delay loop... 498.07
BogoMIPS
<4>OK.
<4>CPU0: Intel 00/07 stepping 02
<6>Total of 2 processors activated
(996.15 BogoMIPS).
<4>enabling symmetric IO mode...
..done.
<4>ENABLING IO-APIC IRQs
<4>init IO_APIC IRQs
<4> IO-APIC pin 0, 5, 9, 10, 11,
15, 16, 17, 18, 19, 20, 32, 33, 34 not connected.
<4>..MP-BIOS bug: 8254 timer not
connected to IO-APIC
<4>...trying to set up timer as
ExtINT... .. (found pin 0) ... works.
<4>number of MP IRQ sources: 46.
<4>number of IO-APIC registers:
35.
<4>testing the IO APIC.......................
<4>.... register #00: 00000000
<4>....... :
physical APIC id: 00
<4>.... register #01: 00220011
<4>.......
: max redirection entries: 0022
<4> WARNING: unexpected IO-APIC,
please mail
<4>
to [EMAIL PROTECTED]
<4>.......
: IO APIC version: 0011
<4>.... register #02: 00000000
<4>.......
: arbitration: 00
<4>.... IRQ redirection table:
<4> NR Log Phy Mask Trig IRR Pol
Stat Dest Deli Vect:
<4> 00 001 01 0
0 0 0 0 0
7 51
<4> 01 000 00 0
0 0 0 0 1
1 59
<4> 02 000 00 0
0 0 0 0 1
1 51
<4> 03 000 00 0
0 0 0 0 1
1 61
<4> 04 000 00 0
0 0 0 0 1
1 69
<4> 05 000 00 1
0 0 0 0 0
0 00
<4> 06 000 00 0
0 0 0 0 1
1 71
<4> 07 000 00 0
0 0 0 0 1
1 79
<4> 08 000 00 0
0 0 0 0 1
1 81
<4> 09 000 00 1
0 0 0 0 0
0 00
<4> 0a 000 00 1
0 0 0 0 0
0 00
<4> 0b 000 00 1
0 0 0 0 0
0 00
<4> 0c 000 00 0
0 0 0 0 1
1 89
<4> 0d 000 00 1
0 0 0 0 0
0 00
<4> 0e 000 00 0
0 0 0 0 1
1 91
<4> 0f 000 00 1
0 0 0 0 0
0 00
<4> 10 000 00 1
0 0 0 0 0
0 00
<4> 11 000 00 1
0 0 0 0 0
0 00
<4> 12 000 00 1
0 0 0 0 0
0 00
<4> 13 000 00 1
0 0 0 0 0
0 00
<4> 14 000 00 1
0 0 0 0 0
0 00
<4> 15 0FF 0F 1
1 0 1 0 1
1 99
<4> 16 0FF 0F 1
1 0 1 0 1
1 A1
<4> 17 0FF 0F 1
1 0 1 0 1
1 A9
<4> 18 0FF 0F 1
1 0 1 0 1
1 B1
<4> 19 0FF 0F 1
1 0 1 0 1
1 B9
<4> 1a 0FF 0F 1
1 0 1 0 1
1 C1
<4> 1b 0FF 0F 1
1 0 1 0 1
1 C9
<4> 1c 0FF 0F 1
1 0 1 0 1
1 D1
<4> 1d 0FF 0F 1
1 0 1 0 1
1 D9
<4> 1e 0FF 0F 1
1 0 1 0 1
1 E1
<4> 1f 0FF 0F 1
1 0 1 0 1
1 E9
<4> 20 000 00 1
0 0 0 0 0
0 00
<4> 21 000 00 1
0 0 0 0 0
0 00
<4> 22 000 00 1
0 0 0 0 0
0 00
<7>IRQ to pin mappings:
<7>IRQ0 -> 2
<7>IRQ1 -> 1
<7>IRQ3 -> 3
<7>IRQ4 -> 4
<7>IRQ6 -> 6
<7>IRQ7 -> 7
<7>IRQ8 -> 8
<7>IRQ12 -> 12
<7>IRQ13 -> 13
<7>IRQ14 -> 14
<7>IRQ21 -> 21
<7>IRQ22 -> 22
<7>IRQ23 -> 23
<7>IRQ24 -> 24
<7>IRQ25 -> 25
Kernel logging (proc) stopped.
Kernel log daemon terminating.
