Probrems w/Compaq Proliant 1800R SMP configuration
Dual Pentium III 500mhz w/320megs of RAM
(updated system firmware-> 6/29/99)
Bios settings
Operating System set to Unixware 7
APIC setting set to FULL TABLE
unexpected IO-APIC warnings showing up during boot, did the second
processor get successfully initialized. /proc/cpuinfo shows a second
processor, but is it truly enabled due to APIC warnings. Attached to this
file is a dmesg outfile and a condensed archive of the /proc directory.
Can anyone tell from these file if the second processor is successfully
being utilized?
Redhat 6.1 was installed
it used the default 2.2.5-15smp kernel and reported APACI error messages,
I then compiled the 2.2.10 kernel and also the 2.3.17 kernel, all kernel
versions still reported the APACI error.
All the documents on the web told me to set the OS to UNIXWARE 7 and set
the APIC settings to FULL TABLE, but the logs keep showing this APACI
error? Anyone successfully setup a Compaq 1800R SMP server before?
Please help.
Roland San Luis
[EMAIL PROTECTED]
proc.tar.gz
9 22:43:28 EDT 1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 498495714 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 496.44 BogoMIPS
Memory: 322308k/327680k available (1044k kernel code, 416k reserved, 3540k data, 68k
init)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.09 usecs.
CPU1: Intel 00/07 stepping 03
calibrating APIC timer ...
..... CPU clock speed is 498.4729 MHz.
..... system bus clock speed is 99.6944 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 498.07 BogoMIPS
OK.
CPU0: Intel 00/07 stepping 03
Total of 2 processors activated (994.51 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 10, 11, 24, 25, 26, 27WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
, 32, 33, 34 not connected.
number of MP IRQ sources: 33.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 0FF 0F 1 1 0 0 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 91
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 99
0f 000 00 0 0 0 0 0 1 1 A1
10 0FF 0F 1 1 0 1 0 1 1 A9
11 0FF 0F 1 1 0 1 0 1 1 B1
12 0FF 0F 1 1 0 1 0 1 1 B9
13 0FF 0F 1 1 0 1 0 1 1 C1
14 0FF 0F 1 1 0 1 0 1 1 C9
15 0FF 0F 1 1 0 1 0 1 1 D1
16 0FF 0F 1 1 0 1 0 1 1 D9
17 0FF 0F 1 1 0 1 0 1 1 E1
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 0FF 0F 1 1 0 1 0 1 1 E9
1d 0FF 0F 1 1 0 1 0 1 1 F1
1e 0FF 0F 1 1 0 1 0 1 1 F9
1f 0FF 0F 1 1 0 1 0 1 1 52
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0084
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I6,P0) -> 31
PCI->APIC IRQ transform: (B0,I6,P1) -> 30
PCI->APIC IRQ transform: (B0,I7,P0) -> 29
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf100-0xf107, BIOS settings: hda:pio, hdb:pio
hda: CD-224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: using high-speed MMX checksum routine
pII_mmx : 1189.482 MB/sec
p5_mmx : 1161.288 MB/sec
8regs : 858.774 MB/sec
32regs : 616.839 MB/sec
using fastest function: pII_mmx (1189.482 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
ncr53c8xx: at PCI bus 0, device 6, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 0, device 6, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc6ffcf00, io_port=0x2000, irq=31
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6fff000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6ffce00, io_port=0x2400, irq=30
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6ffe000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - revision 3.1h
scsi1 : ncr53c8xx - revision 3.1h
scsi : 2 hosts.
Vendor: COMPAQ Model: BD00911934 Rev: 3B02
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
ncr53c876-0-<0,0>: tagged command queue depth set to 8
ncr53c876-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17773524 [8678 MB] [8.7 GB]
sda: sda1 < sda5 sda6 > sda3 sda4
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 68k freed
Adding Swap: 128484k swap-space (priority -1)
TLAN driver, v1.0, (C) 1997-8 Caldera, Inc.
TLAN: eth0 irq=29 io=2c00, Compaq Netelligent Integrated 10/100 TX UTP, Rev. 16
TLAN: eth0: Starting autonegotiation.
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
nfsd_init: initialized fhcache, entries=256
TLAN: eth0: Autonegotiation complete.
TLAN: eth0: Link active.
