On Fri, 24 Sep 1999, Earle R. Nietzel wrote:
> Looking in the interrupts this looks strange:
> 12: 153 122 IO-APIC-level eth0, PS/2 Mouse
> As you can see the eth0 and PS2 port are sharing the same interrupt.
> Is this normal?
is there any option in the BIOS setup to switch to 'MP 1.4' mode. (or
'route PCI interrupts through IOAPIC', or 'OS Type' not set to DOS neither
Novell). If yes then try to change that option and eth0 should go to some
'high' interrupt like IRQ16 or IRQ20. (but it could be the case that the
box has only 16 IOAPIC pins, in that case you should either reconfigure
PCI IRQ routing (if possible via the BIOS), or move the ethernet card
physically to another slot.)
-- mingo
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
