Hi!!
kernel startup told me to mail you guys about this! :)
This is a Compaq Proliant 3000 SMP (2 x PII 450), 1GB RAM. if you need
more data mail me back.
Another problem in this setup is that the machine has 1GB ram, without
giving a parameter like "mem=256M" to the kernel i'm unable to boot.
Gives me an initrd error.
I'm currently trying with mem=512M and more... :)
Thanks in advance,
Nuno Silva
p.s. if this is a mailing-list cc: any answer back to me, as i'm not
subscribed. thanks.
dmesg output follows:
Linux version 2.2.12 ([EMAIL PROTECTED]) version egcs-2.91.66
19990314/Linux (egcs-1.1.2 release)) #1 SMP Sun Oct 3 01:38:05 WEST
1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 448981728 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 447.28 BogoMIPS
Memory: 257836k/262144k available (992k kernel code, 424k reserved,
2844k data,
48k init)
Checking 386/387 coupling... OK, FPU using exception 16 error
reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.21 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 448.9737 MHz.
..... system bus clock speed is 99.7718 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 447.28 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (894.57 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 9, 10, 11, 16, 17, 18, 19, 20, 32, 33, 34 not
connected.
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer as ExtINT... .. (found pin 0) ... works.
number of MP IRQ sources: 47.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 0 0 0 0 0 0 7 51
01 000 00 0 0 0 0 0 1 1 59
02 000 00 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 91
0f 000 00 0 0 0 0 0 1 1 99
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 0FF 0F 1 1 0 1 0 1 1 A1
16 0FF 0F 1 1 0 1 0 1 1 A9
17 0FF 0F 1 1 0 1 0 1 1 B1
18 0FF 0F 1 1 0 1 0 1 1 B9
19 0FF 0F 1 1 0 1 0 1 1 C1
1a 0FF 0F 1 1 0 1 0 1 1 C9
1b 0FF 0F 1 1 0 1 0 1 1 D1
1c 0FF 0F 1 1 0 1 0 1 1 D9
1d 0FF 0F 1 1 0 1 0 1 1 E1
1e 0FF 0F 1 1 0 1 0 1 1 E9
1f 0FF 0F 1 1 0 1 0 1 1 F1
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ24 -> 24
IRQ25 -> 25
IRQ26 -> 26
IRQ27 -> 27
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
IRQ31 -> 31
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered primary peer bus 02
PCI: using PPB(B0,I8,P0) to get irq 29
PCI->APIC IRQ transform: (B1,I0,P0) -> 29
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:78 not found by BIOS
PCI: Device 00:88 not found by BIOS
PCI: Device 00:89 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi : 0 hosts.
scsi : detected total.
cpqarray: Device e11 has been found at 1 0
Compaq SMART2 Driver (v 1.0.5)
Found 1 controller(s)
cpqarray: Finding drives on ida0 (Smart Array 3200)
cpqarray ida/c0d0: blksz=512 nr_blks=177822720
cpqarray ida/c0d1: blksz=512 nr_blks=142253280
Partition check:
ida/c0d0: ida/c0d0p1 ida/c0d0p2 ida/c0d0p3 ida/c0d0p4
ida/c0d1: ida/c0d1p1 ida/c0d1p2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 48k freed
Adding Swap: 1052632k swap-space (priority -1)
Adding Swap: 1052632k swap-space (priority -2)
eth0: OEM i82557/i82558 10/100 Ethernet at 0x4800, 00:50:8B:5A:9E:AE,
IRQ 5.
Board assembly 692290-005, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
__________________________________________________________
Mensagem enviada pelo Xekmail: webmail gr�tis do AEIOU
http://xekmail.aeiou.pt
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
