I can't help with the messages, but your statement about the RAM chips you
are using seems strange.
There are two types of DIMM - SDRAM and EDO or FPM DIMM, one is synchronous
in operation, the other asynchronous. I wouldn't advise mixing types, try
the operation of your board with only one of the RAM chips installed and
make sure the BIOS is set correctly for the RAM.
Rgds,
Derrick.
----- Original Message -----
From: Vladik <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, December 23, 1999 10:20 PM
Subject: [Q] bad motherboard or CPUs
> Hello,
> I purchased about two months ago
> a motherboard and 2 CPUs at the
> computer show, all together for US $300.
>
> Motherboard Stallion M668DS,
> CPUs are Pentium II, 266.
>
> Memory is 128MB 60ns dimm, and 64MB 10ns dimm (non EC).
>
> Basically when I ran Linux 2.2.12, 2.3.31, 2.3.33, or FreeBSD 3.3
> or NT 4.0 SP5, the computer freezes. No mouse movement and I
> cannot ping it.
>
> I upgraded the BIOS on the motherboard to version 5. But the
> problem still persists. At first I thought it happens
> when doing intensive video (or just running XFree),
> but no, I get it when compiling kernel sometimes as well.
> I also thought, it may be memory, but I tried
> memtest program as well as I used the memory on my other
> computers with no problem.
>
> So now I am down to either CPUs or the motherboard,
> I tried just single CPU (one and then the other)
> the problem was still there.
>
> I noticed that once in a while I get the following messages:
>
> APIC error interrupt on CPU#0, should never happen.
> ... APIC ESR0: 00000000
> ... APIC ESR1: 00000008
> ... bit 3: APIC Receive Accept Error.
> APIC error interrupt on CPU#1, should never happen.
> ... APIC ESR0: 0000000a
> ... APIC ESR1: 0000000a
> ... bit 1: APIC Receive CS Error (hw problem).
> ... bit 3: APIC Receive Accept Error.
> APIC error interrupt on CPU#1, should never happen.
> ... APIC ESR0: 00000002
> ... APIC ESR1: 0000000a
> ... bit 1: APIC Receive CS Error (hw problem).
> ... bit 3: APIC Receive Accept Error.
> APIC error interrupt on CPU#1, should never happen.
> ... APIC ESR0: 00000008
> ... APIC ESR1: 0000000a
> ... bit 1: APIC Receive CS Error (hw problem).
> ... bit 3: APIC Receive Accept Error.
>
>
> This is when running linux 2.3.33 (SMP)
>
> I was hoping that readers of this list might be able
> to decode what those messages mean, and help me
> to decide what to buy CPUs or the motherboard
> to fix this (I got screwed at the computer show
> where I bought this stuff).
>
>
>
> Thanks in advance,
> Vladislav.
>
> PS. This is my first posting to this mailing
> list so if I did not specify enough info,
> just let me know.
>
>
>
> -
> Linux SMP list: FIRST see FAQ at htt
p://www.irisa.fr/prive/dmentre/smp-howto/
> To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
>
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
