As you requested. The machine is a Compaq 3000 Server, 2 Prozessors /500MHz Further information if required from Klaus Hoffmann <[EMAIL PROTECTED]> Regards Klaus Hoffmann
Inspecting /boot/System.map Loaded 8826 symbols from /boot/System.map. Symbols match kernel version 2.2.10. No module symbols loaded. klogd 1.3-3, log source = /proc/kmsg started. <4>Linux version 2.2.10 (root@emma3) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #37 SMP Wed Jan 26 18:24:03 MET 2000 <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 <4>Processor #1 Pentium(tm) Pro APIC version 16 <4>Processor #0 Pentium(tm) Pro APIC version 16 <4>I/O APIC #8 Version 17 at 0xFEC00000. <4>Processors: 2 <4>mapped APIC to ffffe000 (fee00000) <4>mapped IOAPIC to ffffd000 (fec00000) <4>Detected 548569219 Hz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 547.23 BogoMIPS <4>Memory: 776576k/786432k available (1348k kernel code, 420k reserved (endbase 0x9f000), 8036k data, 52k init) <5>VFS: Diskquotas version dquot_6.4.0 initialized <6>Checking 386/387 coupling... OK, FPU using exception 16 error reporting. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.35 (19990512) Richard Gooch ([EMAIL PROTECTED]) <4>per-CPU timeslice cutoff: 100.10 usecs. <4>CPU1: Intel 00/07 stepping 03 <4>calibrating APIC timer ... <4>..... CPU clock speed is 548.5239 MHz. <4>..... system bus clock speed is 99.7313 MHz. <4>Booting processor 0 eip 2000 <4>Calibrating delay loop... 547.23 BogoMIPS <4>OK. <4>CPU0: Intel 00/07 stepping 03 <6>Total of 2 processors activated (1094.45 BogoMIPS). <4>enabling symmetric IO mode... ...done. <4>ENABLING IO-APIC IRQs <4>init IO_APIC IRQs <4> IO-APIC pin 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34 not connected. <4>..MP-BIOS bug: 8254 timer not connected to IO-APIC <4>...trying to set up timer as ExtINT... .. (found pin 0) ... works. <4>number of MP IRQ sources: 16. <4>number of IO-APIC registers: 35. <4>testing the IO APIC....................... <4>.... register #00: 00000000 <4>....... : physical APIC id: 00 <4>.... register #01: 00220011 <4>....... : max redirection entries: 0022 <4> WARNING: unexpected IO-APIC, please mail <4> to [EMAIL PROTECTED] <4>....... : IO APIC version: 0011 <4>.... register #02: 00000000 <4>....... : arbitration: 00 <4>.... IRQ redirection table: <4> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <4> 00 001 01 0 0 0 0 0 0 7 51 <4> 01 000 00 0 0 0 0 0 1 1 59 <4> 02 000 00 0 0 0 0 0 1 1 51 <4> 03 000 00 0 0 0 0 0 1 1 61 <4> 04 000 00 0 0 0 0 0 1 1 69 <4> 05 0FF 0F 1 1 0 1 0 1 1 71 <4> 06 000 00 0 0 0 0 0 1 1 79 <4> 07 000 00 0 0 0 0 0 1 1 81 <4> 08 000 00 0 0 0 0 0 1 1 89 <4> 09 0FF 0F 1 1 0 1 0 1 1 91 <4> 0a 0FF 0F 1 1 0 1 0 1 1 99 <4> 0b 0FF 0F 1 1 0 1 0 1 1 A1 <4> 0c 000 00 0 0 0 0 0 1 1 A9 <4> 0d 000 00 1 0 0 0 0 0 0 00 <4> 0e 000 00 0 0 0 0 0 1 1 B1 <4> 0f 000 00 0 0 0 0 0 1 1 B9 <4> 10 000 00 1 0 0 0 0 0 0 00 <4> 11 000 00 1 0 0 0 0 0 0 00 <4> 12 000 00 1 0 0 0 0 0 0 00 <4> 13 000 00 1 0 0 0 0 0 0 00 <4> 14 000 00 1 0 0 0 0 0 0 00 <4> 15 000 00 1 0 0 0 0 0 0 00 <4> 16 000 00 1 0 0 0 0 0 0 00 <4> 17 000 00 1 0 0 0 0 0 0 00 <4> 18 000 00 1 0 0 0 0 0 0 00 <4> 19 000 00 1 0 0 0 0 0 0 00 <4> 1a 000 00 1 0 0 0 0 0 0 00 <4> 1b 000 00 1 0 0 0 0 0 0 00 <4> 1c 000 00 1 0 0 0 0 0 0 00 <4> 1d 000 00 1 0 0 0 0 0 0 00 <4> 1e 000 00 1 0 0 0 0 0 0 00 <4> 1f 000 00 1 0 0 0 0 0 0 00 <4> 20 000 00 1 0 0 0 0 0 0 00 <4> 21 000 00 1 0 0 0 0 0 0 00 <4> 22 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 2 <7>IRQ1 -> 1 <7>IRQ3 -> 3 Kernel logging (proc) stopped. Kernel log daemon terminating.
