hi bertold,
Berthold Kramm wrote:
>
> While Linux is booting without any problem with no SMP compiled in, I
> encounter the following message while booting the same linux kernel compiled
> as SMP:
>
> "aborting command due to timeout pid0, scsi1, channel0, id0, lun0
> trying harder"
>
> This message repeats endlessly until I reset the system ...
> Seemingly something goes wrong while initiating the SCSI devices.
>
> I have Suse Linux 6.4 with a kernel 2.2.14 installed. The motherboard is a
> Gigabyte GA6BXDS with 2 PII 450 MHz processors and 128 Mbyte.
>
i have a problem too with scsi timeout when booting a machine with 4
ppros
and intel chipset with kernels upto 2.2.16 and 2.4.0-test5.
mine runs with bootArgument 'noapic' in lilo.
compile with smp and give this a try.
i will connect a terminal to my machine and post the problem with
the kernel messages till it hangs on scsi.
<snip>
greetz
stefan
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
