On Thu, Mar 03, 2016 at 05:39:14PM +0300, Alexey Brodkin wrote:
> This add DT bindings documentation for ARC PGU display controller.
>
> Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Pawel Moll <pawel.m...@arm.com>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
> Cc: Kumar Gala <ga...@codeaurora.org>
> Cc: devicet...@vger.kernel.org
> Cc: linux-snps-arc@lists.infradead.org
> ---
>
> Changes v1 -> v2:
> * Clean-up
Not really useful. What we like to see is what changed. Maintainers have
short memories and don't remember what they said previously (unless
comments are ignored).
>
> .../devicetree/bindings/display/snps,arcpgu.txt | 33
> ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt
>
> diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt
> b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
> new file mode 100644
> index 0000000..57f3bc8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt
> @@ -0,0 +1,33 @@
> +ARC PGU
> +
> +This is a display controller found on several development boards produced
> +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a
> +framebuffer and sends it to a single digital encoder (usually HDMI).
> +
> +Required properties:
> + - compatible: "snps,arcpgu"
> + - reg: Physical base address and length of the controller's registers.
> + - clocks: A list of phandle + clock-specifier pairs, one for each
> + entry in 'clock-names'.
> + - clock-names: A list of clock names. For ARC PGU it should contain:
> + - "pxlclk" for the clock feeding the output PLL of the controller.
> +
> +Required sub-nodes:
> + - port: The PGU connection to an encoder chip. The connection is modelled
> + using the OF graph bindings specified in
> + Documentation/devicetree/bindings/graph.txt.
> +
> +Example:
> +
> +/ {
> + ...
> +
> + pgu@XXXXXXXX {
> + compatible = "snps,arcpgu";
> + reg = <0xXXXXXXXX 0x400>;
> + clocks = <&clock_node>;
> + clock-names = "pxlclk";
Where's the port? Didn't you previously say it was optional?
> + };
> +
> + ...
> +};
> --
> 2.5.0
>
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
