As of today we use hardcoded MCIP debug mask, so if we launch
kernel via debugger and kick fever cores than HW has all cpus
hang at the momemt of setup MCIP debug mask.
So update MCIP debug mask when the new cpu came online, instead of
use hardcoded MCIP debug mask.
Signed-off-by: Eugeniy Paltsev <eugeniy.palt...@synopsys.com>
---
Changes v1->v2:
* update MCIP debug mask when the new cpu came online instead of
using MCIP debug mask generated from "possible_cpus" mask.
arch/arc/kernel/mcip.c | 37 ++++++++++++++++++++++++++++++++-----
include/soc/arc/mcip.h | 2 ++
2 files changed, 34 insertions(+), 5 deletions(-)
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 1119029..5fe84e4 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -51,6 +51,34 @@ static void mcip_update_gfrc_halt_mask(int cpu)
raw_spin_unlock_irqrestore(&mcip_lock, flags);
}
+static void mcip_update_debug_halt_mask(int cpu)
+{
+ u32 mcip_mask = 0;
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&mcip_lock, flags);
+
+ /*
+ * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK
+ * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK
+ * and CMD_DEBUG_READ_SELECT.
+ */
+ __mcip_cmd(CMD_DEBUG_READ_SELECT, 0);
+ mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+ mcip_mask |= BIT(cpu);
+
+ __mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask);
+ /*
+ * Parameter specified halt cause:
+ * STATUS32[H]/actionpoint/breakpoint/self-halt
+ * We choose all of them (0xF).
+ */
+ __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask);
+
+ raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
static void mcip_setup_per_cpu(int cpu)
{
struct mcip_bcr mp;
@@ -63,6 +91,10 @@ static void mcip_setup_per_cpu(int cpu)
/* Update GFRC halt mask as new CPU came online */
if (mp.gfrc)
mcip_update_gfrc_halt_mask(cpu);
+
+ /* Update MCIP debug mask as new CPU came online */
+ if (mp.dbg)
+ mcip_update_debug_halt_mask(cpu);
}
static void mcip_ipi_send(int cpu)
@@ -138,11 +170,6 @@ static void mcip_probe_n_setup(void)
IS_AVAIL1(mp.gfrc, "GFRC"));
cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
-
- if (mp.dbg) {
- __mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
- __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
- }
}
struct plat_smp_ops plat_smp_ops = {
diff --git a/include/soc/arc/mcip.h b/include/soc/arc/mcip.h
index 1138da5..a91f251 100644
--- a/include/soc/arc/mcip.h
+++ b/include/soc/arc/mcip.h
@@ -37,7 +37,9 @@ struct mcip_cmd {
#define CMD_SEMA_RELEASE 0x12
#define CMD_DEBUG_SET_MASK 0x34
+#define CMD_DEBUG_READ_MASK 0x35
#define CMD_DEBUG_SET_SELECT 0x36
+#define CMD_DEBUG_READ_SELECT 0x37
#define CMD_GFRC_READ_LO 0x42
#define CMD_GFRC_READ_HI 0x43
--
2.9.3
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
