On 11/09/2019 09:34:27+0200, Neil Armstrong wrote:
> Hi,
>
> On 10/09/2019 15:47, Claudiu Beznea wrote:
> > From: Alexandre Belloni <alexandre.bell...@bootlin.com>
> >
> > Some timer drivers may behave either as clocksource or clockevent
> > or both. Until now, in case of platforms with multiple hardware
> > resources of the same type, the drivers were chosing the first
> > registered hardware resource as clocksource/clockevent and the
> > next one as clockevent/clocksource. Other were using different
> > compatibles (one for each functionality, although its about the
> > same hardware). Add DT bindings to be able to choose the
> > functionality of a timer.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.bell...@bootlin.com>
> > Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
> > ---
> > Documentation/devicetree/bindings/chosen.txt | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/chosen.txt
> > b/Documentation/devicetree/bindings/chosen.txt
> > index 45e79172a646..aad3034cdbdf 100644
> > --- a/Documentation/devicetree/bindings/chosen.txt
> > +++ b/Documentation/devicetree/bindings/chosen.txt
> > @@ -135,3 +135,23 @@ e.g.
> > linux,initrd-end = <0x82800000>;
> > };
> > };
> > +
> > +linux,clocksource and linux,clockevent
> > +--------------------------------------
> > +
> > +Those nodes have a timer property. This property is a phandle to the timer
> > to be
> > +chosen as the clocksource or clockevent. This is only useful when the
> > platform
> > +has multiple identical timers and it is not possible to let linux make the
> > +correct choice.
> > +
> > +/ {
> > + chosen {
> > + linux,clocksource {
> > + timer = <&timer0>;
> > + };
> > +
> > + linux,clockevent {
> > + timer = <&timer1>;
> > + };
> > + };
> > +};
> >
>
> Why not in aliases ?
>
> aliases {
> clocksource0 = &timer0;
> clockevent0 = &timer1;
> };
>
> since we can have multiple of each, we should not limit ourselves to 1
> clkevent
> and 1 clksource.
>
> In the aliases case, each driver would expose both capabilities, and the core
> would select
> what to enable.
>
For extendability, you need nodes for that because at some point, you
may need to also be able to select the timer frequency. You can't do
that with an alias.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
linux-snps-arc mailing list
linux-snps-arc@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-snps-arc
