I've been wrestling with trying to get my AWE64g pnp running on my RedHat box, but arn't getting anywhere. I've followed all the instructions in the sound-howto, awe-mini-howto, isapnp-howto, kernel-howto etc. to no avail. I am running a RedHat 5.2 box that I upgraded from 5.1. It is now running kernel 2.2.1. I have compiled the sound drivers as modules. attached is a copy of my isapnp.conf, which has all the settings that windows reports should be correct. here's what happens when I try to load the sound module: Script started on Mon Feb 15 20:10:26 1999 [root@bw66 .netscape]# modprobe -a sound /lib/modules/2.2.1/misc/sb.o: too many values for dma (max 1) sound: Device or resource busy [root@bw66 .netscape]# [root@bw66 .netscape]# exit Script done on Mon Feb 15 20:10:40 1999 I'm really quite frustrated and confused. I've tried this from start to finish half a dozen times to make sure I wasn't skipping any steps and i can't see where I'm going wrong. Any help would be GREATLY appriciated, since my senior project which is due in 2 march is depending on this. Thanks in advace, Josh --- Joshua W. H. Steiner - [EMAIL PROTECTED] - http://eds.org/~joschi "Some scientists claim that hydrogen, because it is so plentyful, is the basic building block of the universe. I dispute that. I say there is more stupidity than hydrogen, and that is the basic building block of the universe." - Frank Zappa
# $Id: pnpdump.c,v 1.10 1997/07/14 22:30:47 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER # # Trying port address 0203 # Board 1 has serial identifier 40 09 53 7c 8f 9e 00 8c 0e # (DEBUG) (READPORT 0x0203) (ISOLATE) (IDENTIFY *) # ANSI string -->Creative SB AWE64 Gold<-- (CONFIGURE CTL009e/156466319 (LD 0 # ANSI string -->Audio<-- (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 1)) (DMA 1 (CHANNEL 5)) (IO 0 (BASE 0x220)) (IO 1 (BASE 0x0330)) (IO 2 (BASE 0x0388)) (ACT Y) )) (CONFIGURE CTL009e/156466319 (LD 1 # ANSI string -->Game<-- (IO 0 (BASE 0x0200)) (ACT Y) )) (CONFIGURE CTL009e/156466319 (LD 2 # ANSI string -->WaveTable<-- (IO 0 (BASE 0x0620)) (IO 0 (BASE 0x0A20)) (IO 0 (BASE 0x0E20)) (ACT Y) )) # Returns all cards to the "Wait for Key" state (WAITFORKEY)
