Okay, time to embarrass myself totally ;-)
On Wed, 17 Feb 1999, Rodrigo Castro wrote:
> Here the files go:
>
> --------------- isapnp.conf -------------------
>
> (READPORT 0x0203)
> (ISOLATE)
> (IDENTIFY *)
> (VERIFYLD N)
> (CONFIGURE CTL0044/19829 (LD 0
> (INT 0 (IRQ 5 (MODE +E)))
> (DMA 0 (CHANNEL 1))
> (DMA 1 (CHANNEL 5))
Try changing this to (DMA 1 (CHANNEL 3))
> --------- conf.modules -----------------
>
> alias char-major-14 sb
> post-install sb /sbin/modprobe "-k" "adlib_card"
> options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
With, of course, the corresponding change here. Another thing you might
look at: does anything change if you do a pre-install of the adlib_card,
instead of a post-install? (not that I think it will, but...)
Also, what chipset are you using? I've read reports of the same problem on
the ESS1688 which went away after "esstype=1688" was given as an option
when loading the sb module. If none of this works, send me the entire
isapnp.conf (with comments), and I'll see what I can see.
And finally, I suggest you might like to get sndconfig, and see if that'll
work for you (even though you use Debian, and not RedHat).
--
.sig under deconstruction. Please watch out for falling stars.
