Hello,
I have the AL440LX motherboard with onboard sound. The sound card is a
Yamaha SA3. I know that the 2.2.12 kernel supports this card. I was
wondering if anybody has had any luck setting this card up - and if so, how
did you do it? I have been unable to find adequate docs for isapnp tool,
but then, I haven't really tried it because I am not sure that is the proper
route. Here is the configuration I use:
### Sound support ###
/sbin/modprobe mpu401
/sbin/modprobe ad1848
/sbin/modprobe opl3sa2 io=0x370 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
/sbin/modprobe opl3 io=0x388
/sbin/modprobe sound
And here is my output from /dev/sndstat:
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux barley 2.2.12 #3 Wed Oct 6 17:45:31 CDT 1999 i686
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: MS Sound System (CS4231) (DUPLEX)
Synth devices:
0: Yamaha OPL2
Midi devices:
0: MPU-401 0.0 Midi interface #1
Timers:
0: System clock
1: MS Sound System (CS4231)
Mixers:
0: OPL3-SA3 and AD1848 (through MSS)
1: MS Sound System (CS4231)
Can anybody help me out?
Thanks,
Tom Veldhouse
[EMAIL PROTECTED]
P.S. The 4-front drivers work great, but I don't like the hassle with
loading and unloading them everytime I upgrade the kernel. I also like
using the open drivers if at all possible.
