Hello,
I recently upgraded my kernel from 2.2.5 to 2.2.12 and I can no longer
output MIDI through the correct synthesizer, AWE internal, instead of
OPL3. Obviously the OPL3 MIDI quality is much worse.
I have all sound support correctly compiled as modules and everything gets
correctly loaded at boot time.
I include the output for /dev/sndstat, /etc/conf.modules and lsmod.
Sorry for the confusion!
My conf.modules looks like this:
alias sound sb
options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330
pre-install sound /sbin/insmod sound dmabuf=1
options -k awe_wave io=0x620
options -k opl3 io=0x388
alias sbawe awe_wave
alias midi awe_wave
post-install awe_wave /bin/sfxload /etc/midi/GU11-ROM.SF2
My /dev/sndstat:
OSS/Free:3.8s2++-971130
Load type: Driver loaded as a module
Kernel: Linux replicant 2.2.12-20 #1 Fri Oct 15 12:49:39 /etc/localtime
1999 i586
Config options: 0
Installed drivers:
Card config:
Audio devices:
0: Sound Blaster 16 (4.13) (DUPLEX)
Synth devices:
0: AWE32-0.4.3 (RAM0k)
1: Yamaha OPL3
Midi devices:
0: Sound Blaster 16
1: AWE Midi Emu
2: Loopback MIDI Port 1
3: Loopback MIDI Port 2
Timers:
0: System clock
Mixers:
0: Sound Blaster
Finaly, lsmod:
Module Size Used by
nls_iso8859-1 2020 2 (autoclean)
nls_cp860 3292 2 (autoclean)
vfat 9180 2 (autoclean)
fat 30464 2 (autoclean) [vfat]
binfmt_misc 3032 0
v_midi 4916 0 (unused)
opl3 11208 0 (unused)
awe_wave 157804 0
sb 33620 0
uart401 5968 0 [sb]
sound 57240 0 [v_midi opl3 awe_wave sb uart401]
soundlow 300 0 [sound]
soundcore 2372 9 [sb sound]
I thought that by aliasing midi to sbawe would do the trick. In my
previous kernel, it did, now it doesnt....
Any help wold be greatly appreciated!
Thanks!
-----------------------------------------------------------------------------
Ricardo Peres
E-Mail: [EMAIL PROTECTED]
Phone: +351 39 790091
Cellular: +351 931 9459192
ICQ: 32940804
Dependable Systems Group
Departamento de Engenharia Inform�tica
Universidade de Coimbra
PORTUGAL
-----------------------------------------------------------------------------
