[why all of a sudden are so many of the messages here also going to a
linux audio list in canada?]
On Tue Oct 26 1999 at 17:19, [EMAIL PROTECTED] wrote:
> I can't seem to get my pci128 line-in to work. This is using the
> (es1370) OSS driver distributed with the 2.2.7 kernel. I've tried all
> the obvious mixer settings as well as all the private ioctl()s the
> driver has, checked my hardware, etc. Can anyone think of anything I
> might be missing?
You need to configure the sound driver module when you load it.
% /sbin/modinfo -p es1370
joystick int array (min = 1, max = 5), description "if 1 enables joystick interface
(still need separate driver)"
lineout int array (min = 1, max = 5), description "if 1 the LINE input is converted to
LINE out"
micbias int array (min = 1, max = 5), description "sets the +5V bias for an electret
microphone"
(btw, default 2.2.12-20 kernel/modules from redhat6.1)
Either pass the relevant parameters on the insmod/modprobe command
line if you (re)load it manually, or put them into /etc/conf.modules
Check the /usr/src/linux/Documentation/sound/ directory for more
information about the parameters... there is a file there specifically
for the es1370 chip.
Cheers
Tony
