I'm having enormous problems getting the SB16 card to work (Non PNP). I set up the default settings but always get the following message with sound playing for 1/4 second on 10 seconds off. Even in windows, I am forced to set the high DMA to the low DMA setting but at least 16-bit works there - except for 44100Hz. Sound: DMA (output) timed out - IRQ/DRQ config error? All I have is a standard video card and IO card installed. That's all. I cannot see what could be conflicting! Sometimes it will just start playing fine for about 15 minutes and then goes screwy and nothing will fix it except a reboot. I've scoured the net for days but have no idea. I'm starting to think I am dumb! ;( I've tried every IRQ, DMA, IO combination, looked at the cards to confirm everything and who knows what else. Any ideas? Currently /etc/conf.modules is as follows: alias sound sb alias midi opl3 options -k sb io=0x220 irq=5 dma=1,5 type=0 options -k sbpcd sbpcd=0x220, Soundblaster options -k opl3 io=0x388 options -k uart401 io=0x330 irq=5 Here is /proc/interupts: 0: 1792597 timer 1: 42492 keyboard 2: 0 cascade 3: 4760734 + serial 4: 195113 + serial 13: 1 math error 14: 490249 + ide0 Here is /proc/DMA: 4: cascade Here is lsmod: Module Pages Used by ppp 5 1 (autoclean) slhc 2 [ppp] 1 (autoclean) uart401 2 0 sound 17 [uart401] 0 (autoclean) autofs 3 1 (autoclean) nfs 13 5 (autoclean) vfat 4 1 (autoclean) fat 6 [vfat] 1 (autoclean)
