On Sunday 12 January 2014 12:10 PM, Axel Lin wrote:
Make the unit of wlen to be byte, and simplify the code to avoid duplicate
code for different wlen cases.
Signed-off-by: Axel Lin<[email protected]>
---
drivers/spi/spi-ti-qspi.c | 61 ++++++++++++++++-------------------------------
1 file changed, 20 insertions(+), 41 deletions(-)
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 4b413e9..2a1ab49 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -208,53 +208,36 @@ static int qspi_write_msg(struct ti_qspi *qspi, struct
spi_transfer *t)
txbuf = t->tx_buf;
cmd = qspi->cmd | QSPI_WR_SNGL;
count = t->len;
- wlen = t->bits_per_word;
+ wlen = t->bits_per_word>> 3; /* in bytes */
while (count) {
switch (wlen) {
- case 8:
+ case 1:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
cmd, qspi->dc, *txbuf);
writeb(*txbuf, qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret =
wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 1;
- count -= 1;
break;
- case 16:
+ case 2:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %04x\n",
cmd, qspi->dc, *txbuf);
writew(*((u16 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret =
wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 2;
- count -= 2;
break;
- case 32:
+ case 4:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %08x\n",
cmd, qspi->dc, *txbuf);
writel(*((u32 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret =
wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 4;
- count -= 4;
break;
}
+
+ ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
+ ret = wait_for_completion_timeout(&qspi->transfer_complete,
+ QSPI_COMPLETION_TIMEOUT);
+ if (ret == 0) {
+ dev_err(qspi->dev, "write timed out\n");
+ return -ETIMEDOUT;
+ }
+ txbuf += wlen;
+ count -= wlen;
}
return 0;
@@ -280,7 +263,7 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct
spi_transfer *t)
break;
}
count = t->len;
- wlen = t->bits_per_word;
+ wlen = t->bits_per_word>> 3; /* in bytes */
while (count) {
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
@@ -292,22 +275,18 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct
spi_transfer *t)
return -ETIMEDOUT;
}
switch (wlen) {
- case 8:
+ case 1:
*rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 1;
- count -= 1;
break;
- case 16:
+ case 2:
*((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 2;
- count -= 2;
break;
- case 32:
+ case 4:
*((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 4;
- count -= 4;
break;
}
+ rxbuf += wlen;
+ count -= wlen;
}
return 0;
Acked-by: Sourav Poddar <[email protected]>
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
