From: Mark Brown <[email protected]>

The GPIO enable and disable is done in the core so does not need to be
replicated in the driver, delete the unneeded code. enable_cs() was not
referenced at all.

Signed-off-by: Mark Brown <[email protected]>
---
 drivers/spi/spi-s3c64xx.c | 29 -----------------------------
 1 file changed, 29 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index e7620f299777..19113538f5c6 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -656,23 +656,6 @@ static void enable_datapath(struct s3c64xx_spi_driver_data 
*sdd,
        writel(chcfg, regs + S3C64XX_SPI_CH_CFG);
 }
 
-static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd,
-                                               struct spi_device *spi)
-{
-       if (sdd->tgl_spi != NULL) { /* If last device toggled after mssg */
-               if (sdd->tgl_spi != spi) { /* if last mssg on diff device */
-                       /* Deselect the last toggled device */
-                       if (spi->cs_gpio >= 0)
-                               gpio_set_value(spi->cs_gpio,
-                                       spi->mode & SPI_CS_HIGH ? 0 : 1);
-               }
-               sdd->tgl_spi = NULL;
-       }
-
-       if (spi->cs_gpio >= 0)
-               gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 1 : 0);
-}
-
 static u32 s3c64xx_spi_wait_for_timeout(struct s3c64xx_spi_driver_data *sdd,
                                        int timeout_ms)
 {
@@ -792,16 +775,6 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data 
*sdd,
        return 0;
 }
 
-static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd,
-                                               struct spi_device *spi)
-{
-       if (sdd->tgl_spi == spi)
-               sdd->tgl_spi = NULL;
-
-       if (spi->cs_gpio >= 0)
-               gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
-}
-
 static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 {
        void __iomem *regs = sdd->regs;
@@ -1118,14 +1091,12 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
 
        pm_runtime_put(&sdd->pdev->dev);
        writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
-       disable_cs(sdd, spi);
        return 0;
 
 setup_exit:
        pm_runtime_put(&sdd->pdev->dev);
        /* setup() returns with device de-selected */
        writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
-       disable_cs(sdd, spi);
 
        gpio_free(cs->line);
        spi_set_ctldata(spi, NULL);
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to