By setting master->max_speed_hz and master->min_speed_hz, spi core will handle checking transfer speed. So we can remove the same checking in this driver.
Signed-off-by: Axel Lin <[email protected]> --- drivers/spi/spi-ep93xx.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 1bfaed6..2f675d3 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -73,8 +73,6 @@ * @clk: clock for the controller * @regs_base: pointer to ioremap()'d registers * @sspdr_phys: physical address of the SSPDR register - * @min_rate: minimum clock rate (in Hz) supported by the controller - * @max_rate: maximum clock rate (in Hz) supported by the controller * @wait: wait here until given transfer is completed * @current_msg: message that is currently processed (or %NULL if none) * @tx: current byte in transfer to transmit @@ -95,8 +93,6 @@ struct ep93xx_spi { struct clk *clk; void __iomem *regs_base; unsigned long sspdr_phys; - unsigned long min_rate; - unsigned long max_rate; struct completion wait; struct spi_message *current_msg; size_t tx; @@ -199,9 +195,9 @@ static void ep93xx_spi_disable_interrupts(const struct ep93xx_spi *espi) * @div_scr: pointer to return the scr divider */ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi, - unsigned long rate, - u8 *div_cpsr, u8 *div_scr) + u32 rate, u8 *div_cpsr, u8 *div_scr) { + struct spi_master *master = platform_get_drvdata(espi->pdev); unsigned long spi_clk_rate = clk_get_rate(espi->clk); int cpsr, scr; @@ -210,7 +206,7 @@ static int ep93xx_spi_calc_divisors(const struct ep93xx_spi *espi, * controller. Note that minimum value is already checked in * ep93xx_spi_transfer_one_message(). */ - rate = clamp(rate, espi->min_rate, espi->max_rate); + rate = clamp(rate, master->min_speed_hz, master->max_speed_hz); /* * Calculate divisors so that we can get speed according the @@ -735,13 +731,6 @@ static int ep93xx_spi_transfer_one_message(struct spi_master *master, struct spi_message *msg) { struct ep93xx_spi *espi = spi_master_get_devdata(master); - struct spi_transfer *t; - - /* first validate each transfer */ - list_for_each_entry(t, &msg->transfers, transfer_list) { - if (t->speed_hz < espi->min_rate) - return -EINVAL; - } msg->state = NULL; msg->status = 0; @@ -917,8 +906,8 @@ static int ep93xx_spi_probe(struct platform_device *pdev) * Calculate maximum and minimum supported clock rates * for the controller. */ - espi->max_rate = clk_get_rate(espi->clk) / 2; - espi->min_rate = clk_get_rate(espi->clk) / (254 * 256); + master->max_speed_hz = clk_get_rate(espi->clk) / 2; + master->min_speed_hz = clk_get_rate(espi->clk) / (254 * 256); espi->pdev = pdev; espi->sspdr_phys = res->start + SSPDR; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
