By setting master->max_speed_hz and master->min_speed_hz, spi core will handle
checking transfer speed. Then we can remove the same checking in this driver.

Signed-off-by: Axel Lin <[email protected]>
---
 drivers/spi/spi-txx9.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c
index 6191ced..523f13d 100644
--- a/drivers/spi/spi-txx9.c
+++ b/drivers/spi/spi-txx9.c
@@ -80,7 +80,6 @@ struct txx9spi {
        void __iomem *membase;
        int baseclk;
        struct clk *clk;
-       u32 max_speed_hz, min_speed_hz;
        int last_chipselect;
        int last_chipselect_val;
 };
@@ -117,9 +116,7 @@ static int txx9spi_setup(struct spi_device *spi)
 {
        struct txx9spi *c = spi_master_get_devdata(spi->master);
 
-       if (!spi->max_speed_hz
-                       || spi->max_speed_hz > c->max_speed_hz
-                       || spi->max_speed_hz < c->min_speed_hz)
+       if (!spi->max_speed_hz)
                return -EINVAL;
 
        if (gpio_direction_output(spi->chip_select,
@@ -309,15 +306,12 @@ static int txx9spi_transfer(struct spi_device *spi, 
struct spi_message *m)
 
        /* check each transfer's parameters */
        list_for_each_entry(t, &m->transfers, transfer_list) {
-               u32 speed_hz = t->speed_hz ? : spi->max_speed_hz;
                u8 bits_per_word = t->bits_per_word;
 
                if (!t->tx_buf && !t->rx_buf && t->len)
                        return -EINVAL;
                if (t->len & ((bits_per_word >> 3) - 1))
                        return -EINVAL;
-               if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz)
-                       return -EINVAL;
        }
 
        spin_lock_irqsave(&c->lock, flags);
@@ -360,8 +354,8 @@ static int txx9spi_probe(struct platform_device *dev)
                goto exit;
        }
        c->baseclk = clk_get_rate(c->clk);
-       c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
-       c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
+       master->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1);
+       master->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1);
 
        res = platform_get_resource(dev, IORESOURCE_MEM, 0);
        if (!res)
-- 
1.8.1.2



--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to