Set bits_per_word_mask so spi core will reject transfers that attempt to use an unsupported bits_per_word value.
fsl_spi_grlib_probe() may update mpc8xxx_spi->max_bits_per_word setting. So set master->bits_per_word_mask after fsl_spi_grlib_probe(). Signed-off-by: Axel Lin <[email protected]> --- v3: revise based on Andreas' suggestion. v2: Make sure bits_per_word can not be greater than mpc8xxx_spi->max_bits_per_word. drivers/spi/spi-fsl-spi.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 4dcb292..f35488e 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -239,12 +239,6 @@ static int fsl_spi_setup_transfer(struct spi_device *spi, if (!bits_per_word) bits_per_word = spi->bits_per_word; - /* Make sure its a bit width we support [4..16, 32] */ - if ((bits_per_word < 4) - || ((bits_per_word > 16) && (bits_per_word != 32)) - || (bits_per_word > mpc8xxx_spi->max_bits_per_word)) - return -EINVAL; - if (!hz) hz = spi->max_speed_hz; @@ -651,6 +645,10 @@ static struct spi_master * fsl_spi_probe(struct device *dev, if (mpc8xxx_spi->type == TYPE_GRLIB) fsl_spi_grlib_probe(dev); + master->bits_per_word_mask = + (SPI_BPW_RANGE_MASK(4, 16) | SPI_BPW_MASK(32)) & + SPI_BPW_RANGE_MASK(1, mpc8xxx_spi->max_bits_per_word); + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) mpc8xxx_spi->set_shifts = fsl_spi_qe_cpu_set_shifts; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
