bus_num might be asigned dynamically to e.g. 32766. In this case the calculated DMA channel based on SPI bus number is bogus. Use SPI channel number instead for calculation.
Signed-off-by: Alexander Stein <[email protected]> --- drivers/spi/spi-topcliff-pch.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index d038a7b..7cb71b0 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -921,7 +921,7 @@ static void pch_spi_request_dma(struct pch_spi_data *data, int bpw) /* Set Tx DMA */ param = &dma->param_tx; param->dma_dev = &dma_dev->dev; - param->chan_id = data->master->bus_num * 2; /* Tx = 0, 2 */ + param->chan_id = data->ch * 2; /* Tx = 0, 2 */; param->tx_reg = data->io_base_addr + PCH_SPDWR; param->width = width; chan = dma_request_channel(mask, pch_spi_filter, param); @@ -936,7 +936,7 @@ static void pch_spi_request_dma(struct pch_spi_data *data, int bpw) /* Set Rx DMA */ param = &dma->param_rx; param->dma_dev = &dma_dev->dev; - param->chan_id = data->master->bus_num * 2 + 1; /* Rx = Tx + 1 */ + param->chan_id = data->ch * 2 + 1; /* Rx = Tx + 1 */; param->rx_reg = data->io_base_addr + PCH_SPDRR; param->width = width; chan = dma_request_channel(mask, pch_spi_filter, param); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
