Add a DMA property to the QSPI node
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
---
This depends on "[PATCH v2 7/8] ARM: shmobile: r8a7790: Add DMAC devices
to DT" of series "[PATCH v2 0/8] R-Car Gen2 DMA Controller driver".
---
arch/arm/boot/dts/r8a7790.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4c74f219c824..495771b3cb34 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -978,6 +978,8 @@
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+ dma-names = "tx", "rx";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
