From: Qipan Li <[email protected]> if spi device has no frequency, spi core will setup the default frequency to max_speed_hz of spi_master according to int spi_setup(struct spi_device *spi) { ... if (!spi->max_speed_hz) spi->max_speed_hz = spi->master->max_speed_hz; ... } this patch moves CSR SiRFSoC SPI frequency set to follow SPI core behaviour.
Signed-off-by: Qipan Li <[email protected]> Signed-off-by: Barry Song <[email protected]> --- drivers/spi/spi-sirf.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c index f63de78..90dc05b 100644 --- a/drivers/spi/spi-sirf.c +++ b/drivers/spi/spi-sirf.c @@ -134,6 +134,7 @@ ALIGNED(x->len) && (x->len < 2 * PAGE_SIZE)) #define SIRFSOC_MAX_CMD_BYTES 4 +#define SIRFSOC_SPI_DEFAULT_FRQ 1000000 struct sirfsoc_spi { struct spi_bitbang bitbang; @@ -629,9 +630,6 @@ static int spi_sirfsoc_setup(struct spi_device *spi) { struct sirfsoc_spi *sspi; - if (!spi->max_speed_hz) - return -EINVAL; - sspi = spi_master_get_devdata(spi->master); if (spi->cs_gpio == -ENOENT) @@ -683,6 +681,7 @@ static int spi_sirfsoc_probe(struct platform_device *pdev) master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH; master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(12) | SPI_BPW_MASK(16) | SPI_BPW_MASK(32); + master->max_speed_hz = SIRFSOC_SPI_DEFAULT_FRQ; sspi->bitbang.master->dev.of_node = pdev->dev.of_node; /* request DMA channels */ -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
