In 3-to-8 mux mode for the CS pins we need to set the PERI_SEL bit in the control register. Currently the driver never sets this bit even when configured for 3-to-8 mux mode. This patch adds code which sets the bit during device initialization when necessary.
Signed-off-by: Lars-Peter Clausen <[email protected]> --- drivers/spi/spi-cadence.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 2404937..5a67498 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -47,6 +47,7 @@ #define CDNS_SPI_CR_CPHA_MASK 0x00000004 /* Clock Phase Control */ #define CDNS_SPI_CR_CPOL_MASK 0x00000002 /* Clock Polarity Control */ #define CDNS_SPI_CR_SSCTRL_MASK 0x00003C00 /* Slave Select Mask */ +#define CDNS_SPI_CR_PERI_SEL_MASK 0x00000200 /* Peripheral Select Decode */ #define CDNS_SPI_CR_BAUD_DIV_MASK 0x00000038 /* Baud Rate Divisor Mask */ #define CDNS_SPI_CR_MSTREN_MASK 0x00000001 /* Master Enable Mask */ #define CDNS_SPI_CR_MANSTRTEN_MASK 0x00008000 /* Manual TX Enable Mask */ @@ -148,6 +149,11 @@ static inline void cdns_spi_write(struct cdns_spi *xspi, u32 offset, u32 val) */ static void cdns_spi_init_hw(struct cdns_spi *xspi) { + u32 ctrl_reg = CDNS_SPI_CR_DEFAULT_MASK; + + if (xspi->is_decoded_cs) + ctrl_reg |= CDNS_SPI_CR_PERI_SEL_MASK; + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, CDNS_SPI_ER_DISABLE_MASK); cdns_spi_write(xspi, CDNS_SPI_IDR_OFFSET, @@ -160,8 +166,7 @@ static void cdns_spi_init_hw(struct cdns_spi *xspi) cdns_spi_write(xspi, CDNS_SPI_ISR_OFFSET, CDNS_SPI_IXR_ALL_MASK); - cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, - CDNS_SPI_CR_DEFAULT_MASK); + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, CDNS_SPI_ER_ENABLE_MASK); } -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
