Hello,
I am currently working on a project for which I need to develop an SPI driver for the first time. This work involves an ADS1256 ADC. This ADC will send its data via SPI to a Raspberry PI 2 running on ArchLinux. In order to drive the ADS1256 I will have two interrupt sources on two seperate GPIOs of the RPi. The gathered data from the ADC will then be displayed on a /dev to be processed later. Since I need the best precision/speed I want to develop a kernel space SPI driver. SPI drivers for RPi are located in this github: https://github.com/raspberrypi/linux/tree/rpi-3.18.y/drivers/spi. When one wants to use SPI he usually inserts spidev and spi-bcm2708 modules so he can interact with them in user space. >From what I understand, spi-bcm2708 is a controller driver and spidev a >generic protocol driver that offers ioctl's. Since I need to control and dialog with the ADC I guess I need to develop a protocol driver for the ADS1256 that will interact with a controller driver. However I cannot determine how my driver interacts with this later: the spi-bcm2708 does not offer things like EXPORT_SYMBOL(). I know linux/{spi.c spi.h} offers an API but then I'd loose the benefits of using spi-bcm2708 (GPIO and registers setup etc). So here is my problem: I am not sure wether my SPI driver must be a protocol or a controller driver, nor how it interacts with other Linux SPI components. I have read things like https://www.kernel.org/doc/Documentation/spi/spi-summary, http://stackoverflow.com/questions/22632713/how-to-write-a-simple-device-driver-in-linux and tried to learn a bit from http://lxr.free-electrons.com/source/drivers/spi/spi-omap2-mcspi.c and of course a lot other sources. Any help would be much appreciated ! Sincerely, Vladimir TOUTAIN Mail: [email protected] Promotion 2016 département IR Grenoble INP - Esisar -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
