Hello.
On 7/16/2015 6:27 PM, Cyrille Pitchen wrote:
This patch documents the DT bindings for the driver of the Atmel QSPI
controller embedded inside sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <[email protected]>
---
.../devicetree/bindings/mtd/atmel-quadspi.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
new file mode 100644
index 000000000000..a0d60ac7ae10
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
@@ -0,0 +1,29 @@
+* Atmel Quad Serial Peripheral Interface (QSPI)
+
+Required properties:
+ - compatible : Should be "atmel,sama5d2-qspi"
+ - reg : the first contains the register location and length,
+ the second contains the memory mapping address and length
+ - interrupts : Should contain the interrupt for the device
+ - clocks : The clock needed by the QSPI controller
+ - #address-cells : should be 1
+ - #size-cells : should be 0
+
+Example:
+
+qspi0: qspi@f0020000 {
Once again, the ePAPR standard tells up to call the node just "spi", not
"qspi".
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0020000 0x100>,
+ <0xd0000000 0x08000000>;
Either you use the leading zeroes or you don't. :-)
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
