I have coded a driver and two modules . I built the Config and have loaded (insmod) streams.o and ptp.o (which contains ptp0.o, ptpa.o and ptpb.o). I have set my Config up as follows:
driver ptp ptp_ * 2 1 module ptpa ptpa_ module ptpb ptpb_ loadable ptp0.o loadable ptpa loadable ptpb node /dev/ptp0 c * ptp 0 ptp node /dev/ptp1 c * ptp 1 ptp objname driver ptp ptp0.o objname module ptpa ptpa objname module ptpb ptpb qlock driver ptp 1 qlock module ptpa 1 qlock module ptpb 1 autopush ptp 0 1 ptpa ptpb device ptp -1 0 0 n 15 -1 -1 -1 -1 This is intended to load as: streamhead ptpb ptpa ptp0 (driver) I link my three objects into the same file ptp.o I insmod streams.o then ptp.o The output of streams includes: STREAMS module "ptpa" registered (loadable), id 4 STREAMS module "ptpb" registered (loadable), id 5 No devices are created. I am expecting ptp0 and ptp1 with the respective minor numbers 0, 1. lsmod shows: ptp 9794 0 (unused) streams 667013 0 [ptp] I have a trace at each entry point in the driver and I never get control. The Big question is: What am I doing wrong? Am I missing code in one of the modules? What else to I need to do - or correct. Thanks! Bill _______________________________________________ Linux-streams mailing list Linux-streams@gsyc.escet.urjc.es http://gsyc.escet.urjc.es/mailman/listinfo/linux-streams
