freeradius -X >> Debug.txt şeklinde çalıştırıp bir kere win 7 den login
olmayı denedim debug çıktıları ektedir
Kolay gelsin..
11 Mayıs 2013 06:24 tarihinde Cagri Emer <[email protected]> yazdı:
> On 11/05/13 7:54 AM, Ethem AYGÜZER wrote:
> > Merhaba arkadaşlar ;
> >
> > debian + freeradius + TP-Link AP ile kullanıcıların kablosuz
> > network üzerinden kendi kullanıcı adı ve şifreleriyle girmlerini
> > sağlamaya çalışıyorum
> >
> > Android 4.1.2 ve linux mint yaptığım denemede ap üzerinde login
> > olup internete çıkabiliyorum
> >
> > Ancak win7 ve winxp de bir türlü login olamadım
> >
> > Yaptığım araştırmada client makinalara sertifika yükleyerek mümkün
> > olacağı söyleniyor başka bir yol varmıdır acaba ?
> >
> > Sertifika olmadan yada sertifikayı otomatik olarak alan
> > linux/wndows/android/ios sistemlerinde ap + freeradius yada benzeri
> > bir sistem kullanmanın bir yolu varmıdır amaç kullanıcıları
> > doğruladıktan sonra ağa dahil etmek ve internete çıkarmak(captive portal
> > harici) ?
> >
> > Teşekkürler kolay gelsin...
>
> Merhaba,
>
> Benim pek freeradius tecrubem yok, siz de hatayi gorebilecegimiz bir
> debug ciktisi paylasmayinca aklima ilk gelen kimlik dogrulama metodu
> olarak kullandiginiz metodun windows tarafinda desteklenmiyor
> olabilecegi oldu.[1][2]
>
> [1]
>
> http://superuser.com/questions/186647/windows-wifi-with-wpa2-enterprise-eap-ttls-pap
> [2]
> http://en.wikipedia.org/wiki/Extensible_Authentication_Protocol#EAP-TTLS
> _______________________________________________
> Linux-sunucu E-Posta Listesi
> [email protected]
>
> Liste kurallarını http://liste.linux.org.tr/kurallar.php bağlantısından
> okuyabilirsiniz;
>
> Bu Listede neden bulunduğunuzu bilmiyorsanız veya artık bu listeden gelen
> e-postaları almak istemiyorsanız aşağıdaki bağlantı adresini kullanarak 1
> dakika içinde üyeliğinizi sonlandırabilirsiniz.
> https://liste.linux.org.tr/mailman/listinfo/linux-sunucu
>
FreeRADIUS Version 2.1.12, for host x86_64-pc-linux-gnu, built on Dec 16 2012
at 13:28:43
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client 192.168.1.0/16 {
require_message_authenticator = no
secret = "123456"
shortname = "deneme"
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/freeradius/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/etc/freeradius/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
Module: Creating Auth-Type = digest
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/freeradius/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.key"
certificate_file = "/etc/freeradius/certs/server.pem"
CA_file = "/etc/freeradius/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/freeradius/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/etc/freeradius/certs/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/";
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/freeradius/modules/preprocess
preprocess {
huntgroups = "/etc/freeradius/huntgroups"
hints = "/etc/freeradius/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/freeradius/modules/files
files {
usersfile = "/etc/freeradius/users"
acctusersfile = "/etc/freeradius/acct_users"
preproxy_usersfile = "/etc/freeradius/preproxy_users"
compat = "no"
}
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/freeradius/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/freeradius/modules/detail
detail {
detailfile =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file
/etc/freeradius/modules/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/freeradius/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/freeradius/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 38677
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.1.253 port 40335, id=14,
length=168
User-Name = "ethem"
NAS-IP-Address = 192.168.1.253
NAS-Port = 0
Called-Station-Id = "F8-1A-67-52-F4-3B:TP-LINK_POCKET_3020_52F43B"
Calling-Station-Id = "74-F0-6D-79-37-A8"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x0201000a01657468656d
Message-Authenticator = 0x926594937ba41401f8d01c859964234d
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "ethem", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 10
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry ethem at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 14 to 192.168.1.253 port 40335
EAP-Message = 0x0102001604101af1249e485171db28df9f5111532b8b
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x92725b1092705facdf892f72e393da74
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.253 port 40335, id=15,
length=182
User-Name = "ethem"
NAS-IP-Address = 192.168.1.253
NAS-Port = 0
Called-Station-Id = "F8-1A-67-52-F4-3B:TP-LINK_POCKET_3020_52F43B"
Calling-Station-Id = "74-F0-6D-79-37-A8"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x020200060319
State = 0x92725b1092705facdf892f72e393da74
Message-Authenticator = 0x1511a01dcd21129ee0067300bacba21c
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "ethem", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry ethem at line 2
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 15 to 192.168.1.253 port 40335
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x92725b10937142acdf892f72e393da74
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.253 port 40335, id=16,
length=295
User-Name = "ethem"
NAS-IP-Address = 192.168.1.253
NAS-Port = 0
Called-Station-Id = "F8-1A-67-52-F4-3B:TP-LINK_POCKET_3020_52F43B"
Calling-Station-Id = "74-F0-6D-79-37-A8"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message =
0x0203007719800000006d1603010068010000640301518defc5e053216d2e64977cd26e5abbc6e3da3dfeba47a10eb0ba418375c87a000018002f00350005000ac013c014c009c00a003200380013000401000023ff010001000000000a0008000005657468656d000a0006000400170018000b00020100
State = 0x92725b10937142acdf892f72e393da74
Message-Authenticator = 0xb4d56135a719bb0a115ffa80cebb55c4
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "ethem", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 3 length 119
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 109
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] (other): before/accept initialization
[peap] TLS_accept: before/accept initialization
[peap] <<< TLS 1.0 Handshake [length 0068], ClientHello
[peap] TLS_accept: SSLv3 read client hello A
[peap] >>> TLS 1.0 Handshake [length 0031], ServerHello
[peap] TLS_accept: SSLv3 write server hello A
[peap] >>> TLS 1.0 Handshake [length 02c0], Certificate
[peap] TLS_accept: SSLv3 write certificate A
[peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
[peap] TLS_accept: SSLv3 write server done A
[peap] TLS_accept: SSLv3 flush data
[peap] TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
[peap] eaptls_process returned 13
[peap] EAPTLS_HANDLED
++[eap] returns handled
Sending Access-Challenge of id 16 to 192.168.1.253 port 40335
EAP-Message =
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
EAP-Message =
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
EAP-Message =
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
EAP-Message = 0xf7f63d0edcd4a979a95416030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x92725b10907642acdf892f72e393da74
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.1.253 port 40335, id=17,
length=193
User-Name = "ethem"
NAS-IP-Address = 192.168.1.253
NAS-Port = 0
Called-Station-Id = "F8-1A-67-52-F4-3B:TP-LINK_POCKET_3020_52F43B"
Calling-Station-Id = "74-F0-6D-79-37-A8"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
Connect-Info = "CONNECT 0Mbps 802.11"
EAP-Message = 0x0204001119800000000715030100020230
State = 0x92725b10907642acdf892f72e393da74
Message-Authenticator = 0x771ed36a5df8edc5affeb76face6e69f
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "ethem", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 4 length 17
[eap] Continuing tunnel setup.
++[eap] returns ok
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP/peap
[eap] processing type peap
[peap] processing EAP-TLS
TLS Length 7
[peap] Length Included
[peap] eaptls_verify returned 11
[peap] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca
TLS Alert read:fatal:unknown CA
TLS_accept: failed in SSLv3 read client certificate A
rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert
unknown ca
SSL: SSL_read failed inside of TLS (-1), TLS session fails.
TLS receive handshake failed during operation
[peap] eaptls_process returned 4
[peap] EAPTLS_OTHERS
[eap] Handler failed in EAP/peap
[eap] Failed in EAP select
++[eap] returns invalid
Failed to authenticate the user.
Using Post-Auth-Type Reject
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group REJECT {...}
[attr_filter.access_reject] expand: %{User-Name} -> ethem
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 3 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 3
Sending Access-Reject of id 17 to 192.168.1.253 port 40335
EAP-Message = 0x04040004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
Cleaning up request 0 ID 14 with timestamp +16
Cleaning up request 1 ID 15 with timestamp +16
Cleaning up request 2 ID 16 with timestamp +16
Waking up in 1.0 seconds.
Cleaning up request 3 ID 17 with timestamp +16
Ready to process requests.
_______________________________________________
Linux-sunucu E-Posta Listesi
[email protected]
Liste kurallarını http://liste.linux.org.tr/kurallar.php bağlantısından
okuyabilirsiniz;
Bu Listede neden bulunduğunuzu bilmiyorsanız veya artık bu listeden gelen
e-postaları almak istemiyorsanız aşağıdaki bağlantı adresini kullanarak 1
dakika içinde üyeliğinizi sonlandırabilirsiniz.
https://liste.linux.org.tr/mailman/listinfo/linux-sunucu
