On 14 December 2013 21:11, Hans de Goede <[email protected]> wrote: > Hi, > > > On 12/09/2013 04:19 PM, Emilio López wrote: >> >> Hi all, >> >> This series adds support for 400MHz MBUS on A20 hardware, when using the >> FAST_MBUS flag on board configuration. The dcdc3 voltage needs to be >> increased for stability, as confirmed by Allwinner [1]. >> >> This series has been tested on 50 pieces of Cubieboard2 and was found to >> be stable. Thanks Cubietech! :) >> >> This should ideally work fine for all A20 boards, but I will let people >> with actual hardware verify it is indeed the case before flipping the >> switch. > > > Good work, I've been doing all my recent upstream kernel work and > testing with a u-boot patches with these patches and they seem to work > great: > > Acked-by: Hans de Goede <[email protected]>
It works for me too. I was recently booting mainline kernel and I built the u-boot for that with these patches. Thanks Michal -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
