AND Finally!!!!
i could get my eMMC on MELE M3.
(1) the script.bin had to be modified to enable sdc_used=1
for mmc2_para.
(2) uboot env param required to be modified to indicate that rootfs is
/dev/mmcblk1p2
I thank everyone for helping. Hope it helps someone else
trying to the internal storage of Mele A20.
# fdisk -l
Disk /dev/mmcblk0: 3879 MB, 3879731200 bytes
1 heads, 16 sectors/track, 473600 cylinders, total 7577600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 * 4628480 7643135 1507328 b W95 FAT32
/dev/mmcblk0p2 73728 106495 16384 6 FAT16
/dev/mmcblk0p3 1 4521984 2260992 5 Extended
/dev/mmcblk0p5 106496 139263 16384 83 Linux
/dev/mmcblk0p6 139264 172031 16384 83 Linux
/dev/mmcblk0p7 172032 1220607 524288 83 Linux
/dev/mmcblk0p8 1220608 3317759 1048576 83 Linux
/dev/mmcblk0p9 3317760 3350527 16384 83 Linux
/dev/mmcblk0p10 3350528 3416063 32768 83 Linux
/dev/mmcblk0p11 3416064 4071423 327680 83 Linux
/dev/mmcblk0p12 4071424 4104191 16384 83 Linux
/dev/mmcblk0p13 4104192 4628479 262144 83 Linux
Partition table entries are not in disk order
Disk /dev/mmcblk1: 7948 MB, 7948206080 bytes
4 heads, 16 sectors/track, 242560 cylinders, total 15523840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x6f20736b
Device Boot Start End Blocks Id System
/dev/mmcblk1p1 2048 34815 16384 83 Linux
/dev/mmcblk1p2 34816 7774207 3869696 83 Linux
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.
