i am following : https://github.com/linux-sunxi/u-boot-sunxi/wiki
i used sunxi branch and make cubietruck ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8 U-Boot SPL 2014.01-rc1-09154-geccc92d (Jan 16 2014 - 01:41:18) Board: Cubietruck DRAM: 1024 MiB CPU: 960000000Hz, AXI/AHB/APB: 3/2/2 Card did not respond to voltage select! spl: mmc init failed: err - -17 ### ERROR ### Please RESET the board ### On Thu, Jan 16, 2014 at 1:20 AM, Rajesh Mallah <[email protected]>wrote: > > > Hi > > i would like to install uboot on the internal MMC card of mele m3 (A20 , > 1024MB) > model. could anyone suggest which uboot source and what board config > should work. > > thanks (but sorry if the question was too novice). > > regds > mallah. > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
