LINUX-SUNXI [core] repositoryformatversion = 0 filemode = true bare = false logallrefupdates = true [remote "origin"] fetch = +refs/heads/*:refs/remotes/origin/* url = https://github.com/jwrdegoede/linux-sunxi.git [branch "sunxi-devel"] remote = origin merge = refs/heads/sunxi-devel
U-BOOT [core] repositoryformatversion = 0 filemode = true bare = false logallrefupdates = true [remote "origin"] fetch = +refs/heads/*:refs/remotes/origin/* url = https://github.com/jwrdegoede/u-boot-sunxi.git [branch "sunxi-next"] remote = origin merge = refs/heads/sunxi-next CONFIG_AHCI_SUNXI=y Just took a git pull recompiled the kernel, modules and dtb sent MicroSD pro and not simply booted the Sata UP more ... al had a copy before the git pull recompiled sent to regular MicroSD he recognizes the HD and do nothing except change the dtb and former Kernek! what could it be? Hug! ## Booting kernel from Legacy Image at 46000000 ... Image Name: Linux-3.13.0-rc7-52420-g41aabcc Created: 2014-01-21 11:58:18 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 5404880 Bytes = 5.2 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 49000000 Booting using the fdt blob at 0x49000000 Loading Kernel Image ... OK Using Device Tree in place at 49000000, end 49007097 Em terça-feira, 21 de janeiro de 2014 05h58min04s UTC-2, Hans de Goede escreveu: > > Hi, > > On 01/20/2014 08:53 PM, Ezaul Zillmer wrote: > > hi Hans > > > > First wanted to thank his work with sunxi ... as they say here in Brazil > you're the guy ! > > > > I noticed the following after your upgrade .. 01/20/2014 my ATA does not > look rose more ! > > # # # # Here before UP ! # # # # # > > > > Image Name : Linux - 3.13.0 - rc7 > > > > [ 1.150317 ] 8021Q : 802.1Q VLAN Support v1.8 > > [ 1.154585 ] Key type dns_resolver registered > > [ 1.159130 ] Registering SWP / SWPB emulation handler > > [ 1.165146 ] ahci - 5v : 5000 mV > > [ 1.168509 ] usb1 - VBUS : 5000 mV > > [ 1.172082 ] usb2 - VBUS : 5000 mV > > [ 1.200799 ] ahci sunxi - 1c18000.ahci : controller can not do PMP , > turning off CAP_PMP > > [ 1.208303 ] sunxi 1c18000.ahci - ahci : forcing PORTS_IMPL to 0x1 > > [ 1.214179 ] sunxi 1c18000.ahci - ahci : AHCI 0001.0100 32 slots 1 ports > 3 Gbps 0x1 impl sunxi mode > > [ 1.222903 ] sunxi 1c18000.ahci - ahci : flags : NCQ SNTF pm led clo pio > slum part ccc only > > [ 1.231594 ] scsi0 : sunxi_ahci > > [ 1.234955 ] ATA1 : SATA max UDMA/133 irq 88 > > [ 1.239639 ] ehci - sunxi 1c14000.ehci0 : EHCI Host Controller > > [ 1.245171 ] ehci - sunxi 1c14000.ehci0 : new USB bus registered , > assigned bus number 2 > > [ 1.252978 ] ehci - sunxi 1c14000.ehci0 : irq 71 , io mem 0x01c14000 > > [ 1.269124 ] ehci - sunxi 1c14000.ehci0 : USB 2.0 started , EHCI 1:00 > > [ 1.275924 ] hub 2-0:1.0 : USB hub found > > [ 1.279773 ] hub 2-0:1.0 : 1 port detected > > [ 1.284455 ] ehci - sunxi 1c1c000.ehci1 : EHCI Host Controller > > [ 1.290026 ] ehci - sunxi 1c1c000.ehci1 : new USB bus registered , > assigned bus number 3 > > [ 1.297789 ] ehci - sunxi 1c1c000.ehci1 : irq 72 , io mem 0x01c1c000 > > [ 1.319118 ] ehci - sunxi 1c1c000.ehci1 : USB 2.0 started , EHCI 1:00 > > [ 1.325805 ] hub 3-0:1.0 : USB hub found > > [ 1.329639 ] hub 3-0:1.0 : 1 port detected > > [ 1.333894 ] rtc - sunxi 1c20d00.rtc : setting system clock to > 1970-01-01 00:00:08 UTC ( 8 ) > > [ 1.584180 ] mmc0 : new high speed SDHC card at address E624 > > [ 1.590049 ] isa bounce pool size: 16 pages > > [ 1.594297 ] mmcblk0 : mmc0 : E624 SU08G 7:40 GiB > > [ 1.600605 ] mmcblk0 : p1 > > [ 4.889135 ] ATA1 : SATA link up 3.0 Gbps ( sstatus 123 SControl 300 ) > > [ 4.904967 ] ata1.00 : ATA - 8 : SAMSUNG HM320II , 2AC101C4 , max > UDMA/133 > > [ 4.911260 ] ata1.00 : 625142448 sectors , multi 0 : LBA48 NCQ (depth > 31/32 ) > > [ 4.927633 ] ata1.00 : configured for UDMA/133 > > [ 4.932311 ] scsi 0:0:0:0 : Direct -Access ATA SAMSUNG HM320II 2AC1 PQ : > 0 ANSI : 5 > > [ 4.941156 ] sd 0:0:0:0 : [ sda ] 625142448 512 - byte logical blocks : > ( 320 GB/298 GiB ) > > [ 4.948875 ] sd 0:0:0:0 : [ sda ] Write Protect is off > > [ 4.953822 ] sd 0:0:0:0 : [ sda ] Write cache : enabled , read cache : > enabled , does not support DPO or FUA > > [ 4.975349 ] sda : sda1 > > [ 4.978721 ] sd 0:0:0:0 : [ sda ] Attached SCSI disk > > [ 5.000798 ] EXT4 - fs ( mmcblk0p1 ) : mounted filesystem with ordered > data mode . Opts : ( null) > > [ 5.008962 ] VFS : Mounted root ( ext4 filesystem ) readonly on device > 179:1 . > > [ 5.016841 ] devtmpfs : mounted > > [ 5.020432 ] Freeing unused kernel memory: 528k ( c0922000 - c09a6000 ) > > INIT : version 2.88 booting > > > > > > > > # # # # NOW AFTER UP # # # # # # # # # # # > > > > Even . Config > > git pull > > > > > > [ 1.183099 ] ip6_tables : ( C ) 2000-2006 Netfilter Core Team > > [ 1.188522 ] sit : IPv6 over IPv4 tunneling driver > > [ 1.193777 ] NET : Registered protocol family 17 > > [ 1.198369 ] Bridge firewalling registered > > [ 1.202495 ] l2tp_core : L2TP core driver , V2.0 > > [ 1.206861 ] 8021Q : 802.1Q VLAN Support v1.8 > > [ 1.210139 ] ATA1 : SATA link down ( sstatus 0 SControl 300 ) > > [ 1.216491 ] lib80211 : common routines for IEEE802.11 drivers > > [ 1.222231 ] Key type dns_resolver registered > > [ 1.226770 ] Registering SWP / SWPB emulation handler > > [ 1.232696 ] ahci - 5v : 5000 mV > > [ 1.236057 ] usb1 - VBUS : 5000 mV > > [ 1.239504 ] usb2 - VBUS : 5000 mV > > [ 1.243904 ] rtc - sunxi 1c20d00.rtc : setting system clock to > 1970-01-01 00:00:08 UTC ( 8 ) > > [ 1.252615 ] Waiting for device / dev/mmcblk0p1 root ... > > [ 1.599045 ] mmc0 : new high speed SDHC card at address E624 > > [ 1.604917 ] isa bounce pool size: 16 pages > > [ 1.609178 ] mmcblk0 : mmc0 : E624 SU08G 7:40 GiB > > [ 1.615470 ] mmcblk0 : p1 > > [ 1.692426 ] EXT4 - fs ( mmcblk0p1 ) : INFO : recovery required on > readonly filesystem > > [ 1.699757 ] EXT4 - fs ( mmcblk0p1 ) : write access will be enabled > During recovery > > [ 2.423617 ] random: nonblocking pool is initialized > > [ 3.274181 ] EXT4 - fs ( mmcblk0p1 ) : recovery complete > > [ 3.286043 ] EXT4 - fs ( mmcblk0p1 ) : mounted filesystem with ordered > data mode . Opts : ( null) > > [ 3.294229 ] VFS : Mounted root ( ext4 filesystem ) readonly on device > 179:1 . > > [ 3.302179 ] devtmpfs : mounted > > [ 3.305714 ] Freeing unused kernel memory: 524K ( c0959000 - c09dc000 ) > > INIT : version 2.88 booting > > > > > > What could it be? says Down ! > > Copy your old uImage UP > > new uImage DOWN > > Which kernel tree are you using ? Did you not only update the uImage but > also the dtb? I'm not seeing > any ahci related messages at all in the new dmesg output, so it seems that > either your dtb does not have > an ahci node (or not with the proper compatible= string), or sunxi-ahci is > not build into your kernel. > > Regards, > > Hans > -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
