perjantai, 24. tammikuuta 2014 18.30.06 UTC+2 Ian Daniher kirjoitti: > > Depending upon your kernel and hardware, you may need to configure the > port as host-only? > > > usb_port_type = 1 > > usb_host_init_state = 1 > > On my A20 board with a similar basic configuration, I have to manually > enable the pin used for usb_drv_vbus_gpio to enable the 5v rail. >
Not work with host-only configuration. Nor with powered usb hub. How can i enable this usb_drv_vbus_gpio pin? Regards Seppo > > > On Fri, Jan 24, 2014 at 5:55 AM, SK <[email protected] <javascript:>>wrote: > >> >> >> perjantai, 24. tammikuuta 2014 12.18.52 UTC+2 Olliver Schinagl kirjoitti: >> >>> On 24-01-14 10:18, SK wrote: >>> >>> >>> > Few days ago i finally got my MID S906 booting to Fedora 19r1 >>> > But usb not seem to activated. (no power to keyboard or mouse) >>> > >>> > >>> > I get access to Fedora initial setup screen but not able to use >>> > keyboard or mouse. >>> > >>> > Does it need some sort of script to activate usb after booting? >>> > Or powered usb hub? >>> Depends, but generally, no; it should just work; double check your >>> script.bin's usb0 settings, make sure it's powered. A powered USB hub >>> helps generally here. >>> >>> My tablet script.bin usb section: >> >> [usbc0] >> usb_used = 1 >> usb_port_type = 2 >> usb_detect_type = 1 >> usb_id_gpio = port:PH04<0><1><default><default> >> usb_det_vbus_gpio = "axp_ctrl" >> usb_drv_vbus_gpio = port:PB09<1><0><default><0> >> usb_ac_enable_gpio = port:PH05<1><0><default><0> >> usb_restrict_gpio = 0 >> usb_host_init_state = 0 >> usb_restric_flag = 0 >> usb_restric_voltage = 3550000 >> usb_restric_capacity = 5 >> >> >> -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
