On Sun, Jan 26, 2014 at 09:12:58AM +0100, Luc Verhaegen wrote: > On Sun, Jan 26, 2014 at 03:41:16AM +0100, Michal Suchanek wrote: > > Hello, > > > > this comes up repeatedly but I did not find a definitive solution. > > > > My tablet has no uart accessible so I use the SD breakout board to get > > uart and boot over USB. > > > > As soon as serial driver initializes I lose serial output: > > http://sprunge.us/VHdE > > > > This happens with stage/sunxi-3.4 and sunxi-3.4 kernel. > > > > Note that console on F02/F04 is not documented in datasheet but u-boot > > succeeds in setting it up. > > > > Scrip.bin > > > > https://github.com/hramrach/sunxi-boards/blob/2535fa4d5d27a220fab94c1c44791448ffa66aca/sys_config/a13/zeng-gc_inet86vs.fex > > > > > > Any idea what might be wrong with the serial driver this time? > > > > Thanks > > > > Michal > > [mmc0_para] > sdc_used = 1 > > Luc Verhaegen.
Please apply other changes from: http://linux-sunxi.org/MicroSD_Breakout#A13_Debug_output_to_sdcard_UART as well. They work, i used them a few weeks ago to bring up my A13 based tablet. Luc Verhaegen. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
