Hi Maxime, On Fri, Jan 17, 2014 at 10:55 AM, Emilio López <emi...@elopez.com.ar> wrote: > Hi, > > El 09/01/14 05:52, Chen-Yu Tsai escribió: > >> clock-output-names is now required for most of sunxi clock nodes, to >> provide the name of the corresponding clock. Add the new requirements, >> exceptions, as well as examples. >> >> Signed-off-by: Chen-Yu Tsai <w...@csie.org> >> --- >> Documentation/devicetree/bindings/clock/sunxi.txt | 36 >> +++++++++++++++++++---- >> 1 file changed, 31 insertions(+), 5 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt >> b/Documentation/devicetree/bindings/clock/sunxi.txt >> index 0c127cd..8a9147d 100644 >> --- a/Documentation/devicetree/bindings/clock/sunxi.txt >> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt >> @@ -44,10 +44,18 @@ Required properties for all clocks: >> multiplexed clocks, the list order must match the hardware >> programming order. >> - #clock-cells : from common clock binding; shall be set to 0 except for >> - "allwinner,*-gates-clk" where it shall be set to 1 >> + "allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk" and >> + "allwinner,sun4i-pll6-clk" where it shall be set to 1 >> >> -Additionally, "allwinner,*-gates-clk" clocks require: >> -- clock-output-names : the corresponding gate names that the clock >> controls >> +Additionally, most clocks require "clock-output-names": >> +- "allwinner,*-gates-clk" : the corresponding gate names that the clock >> controls >> +- "allwinner,sun4i-pll5-clk" : "pll5_ddr", "pll5_mbus" >> +- "allwinner,sun4i-pll6-clk" : "pll6_sata", "pll6_other" >> +- "allwinner,sun4i-cpu-clk", "allwinner,sun4i-axi-clk", >> + "allwinner,sun4i-ahb-clk", "allwinner,sun4i-ahb-clk", >> + "allwinner,sun4i-apb1-mux-clk", "allwinner,sun4i-apb1-clk" >> + do not need "clock-output-names" >> +- all others clocks : the corresponding module name of that clock > > > As we discussed on IRC, I wonder if such verbosity is actually needed. Maybe > we should dictate that all clocks must list their corresponding outputs on > clock-output-names (with it being the module name if it only has one > output).
Maxime, could we get your input on this? Thanks ChenYu -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.